Then I compiled the VDR-software (version 1.2.1).
When I start the software either via /usr/local/bin/vdr or /usr/local/bin/runvdr I only receive these in /var/log/messages:
Jul 24 16:10:46 thomas vdr[24648]: VDR version 1.2.1 started
Jul 24 16:10:46 thomas vdr[24648]: loading /video/sources.conf
Jul 24 16:10:46 thomas vdr[24648]: loading /video/diseqc.conf
Jul 24 16:10:46 thomas vdr[24648]: loading /video/channels.conf
Jul 24 16:10:46 thomas vdr[24648]: loading /video/svdrphosts.conf
Jul 24 16:10:46 thomas vdr[24648]: loading /video/ca.conf
Jul 24 16:10:46 thomas vdr[24648]: loading /video/keymacros.conf
Jul 24 16:10:46 thomas kernel: tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc
Jul 24 16:10:47 thomas vdr[24648]: found 1 video device
Jul 24 16:10:47 thomas vdr[24648]: setting primary device to 1
Jul 24 16:10:47 thomas vdr[24648]: device 1 has no MPEG decoder
Jul 24 16:10:47 thomas vdr[24648]: SVDRP listening on port 2001
Johannes Stezenbach wrote:
On Thu, Jul 24, 2003 at 07:05:32AM +0200, Thomas Schumann wrote:
After compiling the sources, when I type 'make insmod' I receive this error message:
dvb-ttpci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
make[1]: *** [insmod] Fehler 1
make[1]: Verlassen des Verzeichnisses Verzeichnis �/usr/archiv/dvb-t/linuxtv-dvb-1.0.0-pre3/driver/av7110�
Try the driver from CVS. If that doesn't work post the kernel messages from loading the driver + 'lspci -vv' and 'lspci -vvn' output for the SAA7146.
Johannes
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
