On Thursday 31 July 2003 17:44, Edward Wildgoose wrote:
> Yep, happens if you just use tzap and don't even view the output.
>
> The issue is that when the card changes to a different mux, then
> something suddenly dies. For most people it still goes through the
> motions of tuning, symptoms vary slightly, but the point is that to
> all intents and purposes the card feigns being alive, but no data
> comes out, and there is nothing coming out of the analogue either. I
> have posted some better descriptions in the past.
Hm, I can confirm these lock-ups with DVB-S, too.
It happens very, very rarely.
Until now I found the following:
(1) The frontend is fully operational. You can switch channels using
vdr or szap. Frontend status is normal, but there is no picture,
no sound, nothing. scan -c reports timeout.
(2) The problem can be fixed by unloading dvb-ttpci and
loading it again. It's probably a firmware issue.
(3) There is no ARM crash., so the problem cannot be detected
by [dvb-av7110].
Oliver
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
