Hi, Make sure R polarized ones say V (13 voltz) and L polarizerd ones sayH (18 voltz)
Set your LOF to 11250. An old entry for this might look like: XPRS (TV):12399:V:20::20000:5154:5155:0:0:199 here the 20 is local to my setup (diseqc setting) I don't think BEV uses spectral inversion, I leave it to auto and it works happily. Things may have changed, but I had to change the LOF to 11250 from 10600 or 9750 in the szap code itself. _J In the new year, Jerry Beuree wrote: > Hi, > > I've been pounding on this for a while and haven't been able to get much > success making this work under linux. I'm in Canada trying to connect to > the Expressvu sat. The free channels work under Windows, but I haven't > been able to get a signal lock with linux. > > I've tried modifying the szap app to handle the circular polarities, and > the changes look good, but my problem must be something bigger. For > example, I'm trying to get a free channel on freq 12399 MHz with szap. > It gives me the following output: > > reading channels from file '/home/mythtv/.szap/channels.conf' > zapping to 'bev1': > sat 0, frequency = 12399 MHz 3, symbolrate 20000000, vpid = 0x1422, apid > = 0x1423 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 03 | signal 8251 | snr 70e0 | ber 0000ff08 | unc 00000000 | > status 03 | signal 81bd | snr 70c5 | ber 0000ff00 | unc 00000000 | > status 03 | signal 7d08 | snr 70a1 | ber 0000ff00 | unc 00000000 | > status 03 | signal 781e | snr 70d4 | ber 0000ff08 | unc 00000000 | > status 03 | signal 773a | snr 70fe | ber 0000ff08 | unc 00000000 | > status 03 | signal 7001 | snr 709e | ber 0000ff08 | unc 00000000 | > status 03 | signal 6e07 | snr 7095 | ber 0000ff00 | unc 00000000 | > status 03 | signal 6928 | snr 6fea | ber 0000ff08 | unc 00000000 | > status 03 | signal 8338 | snr 70ad | ber 0000ff00 | unc 00000000 | > status 03 | signal 81ee | snr 70c5 | ber 0000ff00 | unc 00000000 | > > I think the signal looks good. It thinks there's a carrier, although I > never get a lock. Any recommendations on where to go from here? I've > looked all through the drivers to see if there would be anything which > wouldn't work in NA, but the only things I found were in the apps. I'm > also forcing inversion on, which is needed here. > > Thanks in advance, > Jerry > > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as > subject. > -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
