Holger! You Beauty! I have compiled up the sp887x.c with success and I now appear to be able to get the frontend working - -well at least it's tuning for me!
I now have a completed channels.conf created using DVB/apps/scan. DVB/apps/tzap -r is now happily tuning away and generating what I would consider to be correct output: [EMAIL PROTECTED] szap]# ./tzap -r "ABC TV Melbourne" using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 226500000 Hz status 01 | signal ffff | snr ad2a | ber ffffffff | unc 00000000 | status 1f | signal ffff | snr aa8a | ber 00000099 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr aaca | ber 000000ba | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr a8ca | ber 00000099 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr a8aa | ber 0000008d | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr a95a | ber 000000a7 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr a9ca | ber 000000a8 | unc 00000000 | FE_HAS_LOCK etc... xine works a treat but I havn't been able to get mplayer going. I'll document all the steps required over the weekend. So - Avermedia DVB-T now works with Linux!!!!!! regards, Mark ----- Original Message ----- From: "Holger Waechtler" <[EMAIL PROTECTED]> To: "Mark Edwards" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Thursday, September 04, 2003 7:39 PM Subject: [linux-dvb] Re: Microtune 7202D > Mark Edwards wrote: > > Anyone on this list know of the Microtune 7202D frontend? This is the > > frontend in the AverMedia DVB-T. Is this an equivalent to any of the > > existing supported frontends - perhaps the Nova-T? > > you find a driver in our CVS, module dvb-hw/dvbusb-fx2/driver/sp887x.c. > > Holger > > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject. > > -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
