Hello Michael, Your tip was right. After using your procedure it is loading the drivers. But I can't use any programs. I have added the ourput of dmesg after loading the drivers and also the result of czap (same result with scan). The devices seems not be available. They do exist in /dev/dvb, but nothing inside. Also /dev/video.
What is wrong? Johannes output from dmesg: i2c-core.o: i2c core module version 2.6.4 (20020719) Linux video capture interface: v1.00 saa7146_core: saa7146_register_extension(): ext:c7a7f140 saa7146: register extension 'Multimedia eXtension Board'. saa7146_core: saa7146_init_one(): pci:cfff3c00 PCI: Found IRQ 9 for device 00:09.0 PCI: Setting latency timer of device 00:09.0 to 64 saa7146_core: found saa7146 @ mem d09b3000 (revision 0, irq 9) (0x0000,0x0000). saa7146_i2c: saa7146_i2c_adapter_prepare(): bitrate: 0x00000400 tea6415c.o: detected @ 0x43 on adapter saa7146 (0) tda9840.o: detected @ 0x42 on adapter saa7146 (0) saa7111: probing saa7146 (0) i2c adapter [id=0x60000] saa7111_client_attach: chip version 1 @ 0x00000024 tuner: probing saa7146 (0) i2c adapter [id=0x60000] tuner: chip found @ 0xc0 tea6420.o: detected @ 0x4c on adapter saa7146 (0) tea6420.o: detected @ 0x4d on adapter saa7146 (0) saa7146_fops: saa7146_vv_init(): dev:c45dfce0 saa7146_vbi: vbi_init(): dev:c45dfce0 saa7146_fops: saa7146_register_device(): dev:c45dfce0, name:'mxb' saa7146_fops: saa7146 (0): registered device video0 [v4l2] mxb: found 'Multimedia eXtension Board'-0. tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) ----------------------------------- attempt to scan: # ./czap 3sat using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' 1 3sat:394000000:INVERSION_OFF:6900000:FEC_NONE:QAM_64:210:220 1 3sat: f 394000000, s 6900000, i 0, fec 0, qam 3, v 0xd2, a 0xdc ERROR: failed opening '/dev/dvb/adapter0/frontend0' (No such device) ---------------------------------- Hello Johannes, > I just got a Siemens MXB card (SAA7146). I tried to use that with linuxtv-dvb-1.0.0 > on a > Suse 8.1. > Compiling works, but make insmod fails as below. It looks to me as if dvb-ttpci.o > would > not find the card. Well, not every saa7146 based card is a DVB card. The MXB is an *analog* TV card, so you should use the "mxb.o" driver from the "analog-2.4" directory of the "dvb-kernel" CVS driver. For futher informations have a look at my MXB project page at http://www.gdv.uni-hannover.de/~hunold1/linux/saa7146/mxb.html There are compilation instructions plus additional background informations. It's possible to use the driver with the "DVB" video4linux-1 driver, just in case you have an saa7146 based DVB card, too. > Any help isappreciated. > Johannes CU Michael. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
