Am Dienstag, 2. September 2003 23:35 schrieb Michael Lothian: > Quoting Steffen Barszus <[EMAIL PROTECTED]>: > > Am Dienstag, 2. September 2003 16:05 schrieb Thomas Backlund: > > > Michael Lothian kirjoitti viestissään (lähetysaika Tiistai 2. > > > Syyskuuta 2003 > > > > > > 15:35): > > > > Quoting Steffen Barszus <[EMAIL PROTECTED]>: > > > > > probeall /dev/dvb dvb-ttpci > > > > > alias /dev/dvb/* /dev/dvb > > > > > below dvb-ttpci alps_bsrv2 alps_tdmb7 alps_tdlb7 > > > > > add below dvb-ttpci grundig_29504-401 grundig_29504-491 > > > > > add below dvb-ttpci stv0299 ves1820 > > > > > > > > > > the same i posted just two or three times ;) > > > > > > > > Well for the second or third time this doesn't work ;) It > > > > complains about the grundig_29504-401 driver. I tried removing > > > > this, at startup lsmod | grep dvb shows nothing. modprobe > > > > dvb-ttpci will load the drivers however > > > > /dev/dvb/adapter0/fronend0 is still missing. > > > > Seems that sympa is eating mail . I haven't read that this doesn't > > work for you. > > > > > > I can get it to appear using > > > > > > > > >>alias char-major-250 dvb > > > > >>alias dvb dvb-ttpci > > > > >>below dvb-ttpci alps_bsrv2 alps_tdmb7 alps_tdlb7 > > > > >>add below dvb-ttpci tda1004x > > > > >>add below dvb-ttpci stv0299 ves1820 > > > > >>options dvb-core dvb_shutdown_timeout=0 > > > > I will search the dvb-mailinglist about this. > > > > > > However I still have to modprobe dvb-ttpci each time I boot up > > > > the pc. > > > > Ok. From what i see the difference is on module tda1004x, it is in > > your entry but not in mine. So could you try the following: > > > > probeall /dev/dvb dvb-ttpci > > alias /dev/dvb/* /dev/dvb > > below dvb-ttpci alps_bsrv2 alps_tdmb7 alps_tdlb7 > > add below dvb-ttpci grundig_29504-401 grundig_29504-491 > > add below dvb-ttpci stv0299 ves1820 tda1004x > > > > I have no clue if > > alias char-major-250 dvb-ttpci > > is necessary. Maybe other know that better then me. the above is > > still working for me. > > > > Regards > > > > Steffen > > Using exactly what you have written above /dev/dvb doesn't appear at > boot. I have to type in modprobe dvb-ttpci. > > Without the tda1004x /dev/dvb doesn;t appear at boot. When modprobe > dvb-ttpci is loaded /dev/dvb appears however there is no > /dev/dvb/adapter0/fronend0 (the above has this. > > I stream using... > > dvbstream -f 570000 -c 0 -o -qam 16 -cr 2_3 -I 0 -ps 201 202 | > mplayer -cache 4096 - > > However everytine I do this > > Sep 2 22:21:52 localhost kernel: tda1004x_init: Unable to open > firmware /etc/dvb/tda1004x.mc > > appears in /var/log/messages > > Strange that without the tda1004x frontend it doesn;t work yet with > it, it works but doesn't use the frontend (I don't think) > > Any suggestions?
I guess something for linux-dvb mailinglist ? :( Have the modules.conf entries to be different depending on the device ? That would be the opposite , from what i have understood about it. Steffen -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
