On Thu, 2003-09-18 at 15:18, Johannes Stezenbach wrote: > > - if (this_pid < 0x100 || this_pid > 0x1fff) > > + if (this_pid < 0x1 || this_pid > 0x1fff) > > PID 0 is also valid >
Ok thanks, need to communicate this to Kenneth. > You shouln't *ever* do ioctls w/o checking the return value/errno > (even though szap does it...). > Actually I was wondering, based on the eutelsat specs should the tuning sequence be like this for best backward compatibility?: 15ms quiet period SET_TONE SEC_TONE_OFF 15ms quiet period SET_VOLTAGE SEC_VOLTAGE_13 15ms DISEQC_SEND_MASTER_CMD (E0 10 38 ..) 100ms //Diseqc1.1 recommended action for uncommitted switches DISEQC_SEND_MASTER_CMD (E0 10 39 ..) 100ms //Diseqc1.1 recommended action for multi-stage... DISEQC_SEND_MASTER_CMD (E0 10 38 ..) 100ms //Diseqc1.1 recommended action for uncommitted multi-stage... DISEQC_SEND_MASTER_CMD (E0 10 39 ..) 100ms 15ms SET_TONE, t 15ms SET_VOLTAGE, v 15ms While I the 100ms delays can be shortened to about 50ms, I still think this would have a major effect on channel changing speed - which is already getting some critique as far as I have read the Mythtv lists. I quess the repeats for the multi-stage could very well be controlled from settings ui, as well as, support for uncommitted switches. Anyhow, I would be interested in knowing if I have understood the diseqc stuff right - just to educate myself on the subject. > > The other stuff looks OK to me. > :) Now I have just to get the card in order - I have been able to confirm that the feed from the antenna is ok, and diseqc works ok at that end, so it must be the Nexus-S card that just decided it is time to go... luckily the warranty period is still on... Petri -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
