Hi Guys, Am trying to get a Nebula DigiTV working with Linux. With no success.
I've used: - linux-2.6.0-test5 - bttv9-20030918 - linux-dvb (from cvs - 19/9/2003) I think that the Nebula DigiTV requires the nxt6000 module. (Haven't found an explicit statement although there are inferences). This isn't available as an option in linux-2.6.0-test5 (after linking with linux-dvb) so I had to change the Kconfig. There was some juggling getting the kernel modules built but it appears ok. Loading the modules (and using debug on the nxt6000): [EMAIL PROTECTED] root]# modprobe dvb-bt8xx [EMAIL PROTECTED] root]# modprobe nxt6000 debug=1 Sep 20 12:11:00 teevee kernel: DVB: registering new adapter (Nebula DigiTV DVB-T). Sep 20 12:11:07 teevee kernel: nxt6000: init Sep 20 12:11:07 teevee kernel: nxt6000: attach Sep 20 12:11:07 teevee kernel: nxt6000: detected TI ALP510 tuner at 0xC0 Sep 20 12:11:07 teevee kernel: nxt6000: attached at 0:0 Sep 20 12:11:07 teevee kernel: DVB: registering frontend 0:0 (NxtWave NXT6000)... Sep 20 12:11:07 teevee kernel: nxt6000: nxt6000_read error (.addr = 0x18, reg: 0x73, ret: -121) Sep 20 12:11:07 teevee kernel: nxt6000: nxt6000_read error (.addr = 0x24, reg: 0x73, ret: -121) Sep 20 12:11:07 teevee kernel: nxt6000: nxt6000_read error (.addr = 0x28, reg: 0x73, ret: -121) After this .. There are definitely problems using the higher level applications. For example: [EMAIL PROTECTED] dvbtune]# ./dvbtune -f 543500000 -i Using DVB card "NxtWave NXT6000" tuning DVB-T (in Australia) to 543500000 Hz polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Bit error rate: 0 Signal strength: 0 SNR: 0 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC <transponder type="T" freq="543500000"> Nothing to read from fd_sdt </transponder> I'm guessing the above should have returned some useful information. In addition on frequencies that I know are being used it throws an error: [EMAIL PROTECTED] dvbtune]# ./dvbtune -f 205500000 -i Using DVB card "NxtWave NXT6000" tuning DVB-T (in Australia) to 205500000 Hz polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_TIMEDOUT FE_HAS_CARRIER Not able to lock to the signal on the given frequency Any assistance would be greatly appreciated .. TIA, -Greg -- -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
