Chris Samuel wrote: > and scan says: > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 662499840 1 3 3 3 1 1 0 > >>> tune to: > 662499840:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE > WARNING: filter timeout pid 0x0011 > WARNING: filter timeout pid 0x0000 > WARNING: filter timeout pid 0x0010
You could try 'scan -c5'. But at least the PAT (PID 0) should be repeated every 100ms or so. Maybe it's a CRC problem. Bad signal? you could try to remove the DMX_CHECK_CRC flag in scan.c. Johannes -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
