Hi Are you sure that you are loading the frontend module OK? Do you see any messages in dmesg, like: tda1004x: Detected Philips TDA10045H. tda1004x: Detected Philips TDM1316L tuner. DVB: registering frontend 0:0 (Philips TDA10045H)... TT-Budget/WinTV-NOVA-T PCI adapter 0 has MAC addr = 00:d0:5c:22:06:39
Check lsmod and make sure that you can see tda1004x. I had a problem recently upgrading to one of the recent 2.6 test kernels because the configuration option CONFIG_STANDALONE was set which means that modules which require firmware to be loaded later aren't prompted for in the kernel configuration menu system. CONFIG_STANDALONE must be unset. My apologies if I have misdiagnosed your problem... Cheers Johnny On Thursday 09 October 2003 8:32 pm, Kieran Fulke wrote: > so, I just built 2.6.0-test7, and now I have no frontend device, and no > debug when loading tda1004x. I dont remember reading about any changes > that would have caused those, though? > > anyway, I still cant get the card to tune up at all under linux, even > with the -5 option passed to scan, built from todays CVS. it seems to > say there's no signal on any of the channels i'm trying. I tried using a > channels.conf from someone on this list who recieves from the same > transmitter as me, but that hasnt worked either. > unfortunately, i get flawless reception on all channels under windows. > Bah, etc. > > this is one of the nova-t's with no mpeg decoder or a CI connector. it > does have the IR connector though > i can provide a picture if necessary, and any debug people might find > useful in helping me get this sorted. > > cheers, > Kieran. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
