I have problems to set up vdr streaming server with TT-Budget2 DVB-T and DVB-S cards. VDR crashes with streamdev plugin activated. Without the plugin vdr refuses to switch channels to the non-primary device. I use fresh CVS DVB drivers (I tried also about one month old version) with Linux 2.4.22.
I think the problem is in DVB drivers because I'm not able to simultaneously activate (after tzap and szap commands) dvbstreams piped to mplayers. One dvbstream at a time works without problems.
lspci says:
00:0e.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH: Unknown device 100f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at effffc00 (32-bit, non-prefetchable) [size=512]
00:0f.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH: Unknown device 1011
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at effffa00 (32-bit, non-prefetchable) [size=512]
I have moved the DVB cards to slots which do not share IRQs but it didn't help. /proc/interrupts shows:
CPU0 0: 8057518 XT-PIC timer 1: 2 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 4 XT-PIC rtc 10: 32814 XT-PIC saa7146(0) 11: 355966 XT-PIC eth0, eth1 12: 22288 XT-PIC saa7146(1) 14: 73361 XT-PIC ide0 NMI: 0 ERR: 0
The motherboard is ASUS K7M with Athlon 950 MHz CPU. Here is DVB related dmesg output:
DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI). PCI: Found IRQ 10 for device 00:0e.0 stv0299.c: setup for tuner SU1278/SH DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)... mt312_read: ret == -121 DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI). PCI: Found IRQ 12 for device 00:0f.0 tda1004x: Detected Philips TDA10045H. tda1004x: Detected Philips TDM1316L tuner. DVB: registering frontend 1:0 (Philips TDA10045H)... mt312_read: ret == -121 TT-Budget/WinTV-NOVA-CI PCI adapter 0 has MAC addr = 00:d0:5c:02:9a:c8 TT-Budget/WinTV-NOVA-T PCI adapter 1 has MAC addr = 00:d0:5c:02:9d:08
Technisat SkyStar2 driver loading
The tda1004x.mc file (v2.15a) is in /etc/dvb. Do you have any ideas what could be wrong?
BR, Seppo
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
