Quoting Jamie Honan <[EMAIL PROTECTED]>: > Also: > > A user has a Twinhan DST clone which has a pci subsystem id not 0. > > # modprobe bttv bttv_verbose=1 bttv_gpio=1 bttv_debug=1 irq_debug=1 > card=0x68 > i2c_hw=1 > > bttv: driver version 0.9.12 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 7, latency: 32, mmio: > 0xe2011000 > bttv0: subsystem: 11bd:0026 (UNKNOWN) > please mail id, board name and the correct card= insmod option to > [EMAIL PROTECTED] > > >Pinnacle PCTV SAT CI.
Also: Subsystem vendor id/subsystem id: 1822:0001 "Twinhan VisionPlus DVB-T" terrestial FTA DTV card (Australian version). This card is not mentioned on Twinhan website, but is it avaliable here: www.digitalnow.com.au. I don't know what is correct card= parameter for this card as I haven't got it to work yet. It will probably be 0x68, the same as Twinhan DST card. At least bttv does not lock up when I pass card=0x68. Regards, Dmitri -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
