Hi, i'm trying to configure SS2 card first time, but always with $SUBJ error messages. ------------------------------ hroch:/usr/src/packages/SOURCES/DVB/apps/szap # ./szap -c channels.conf-dvbs-astra -n 47 -r reading channels from file 'channels.conf-dvbs-astra' zapping to 'CNN Int.': sat 0, frequency = 12168 MHz V, symbolrate 27500000, vpid = 0x00a5, apid = 0x0064 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' opening frontend failed: No such device ------------------------------------ DVB is compiled from CVS on SUSE LINUX 9.0 ------------------------------------- hroch:/usr/src/packages/SOURCES/DVB # uname -a Linux hroch 2.4.21-144-athlon #1 Fri Nov 14 00:01:10 UTC 2003 i686 athlon i386 GNU/Linux -------------------------------------- I followed all instructions in INSTALL including 'makedev.napi'. dmesg writes --------------------------------------- Technisat SkyStar2 driver loading PCI: Found IRQ 10 for device 00:0b.0 skystar2.c: FlexCopII(rev.130) chip found skystar2.c: MAC address = 00:d0:d7:01:7b:29:00:00 skystar2.c: key = b2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DVB: registering new adapter (PCI device 13d0:2103 (Techsan Electronics Co Ltd)). mt312_read: ret == -121 ------------------------------------------ All kernel modules are loaded and signal from satellite is OK. ------------------------------------------- Module Size Used by Tainted: P nls_iso8859-1 2844 0 (autoclean) udf 94752 0 (autoclean) skystar2 23084 0 (unused) mt312 6444 0 tda1004x 10984 0 ves1820 5248 0 stv0299 8372 0 (unused) grundig_29504-491 4196 0 grundig_29504-401 4716 0 alps_tdlb7 6392 0 alps_tdmb7 4552 0 alps_bsrv2 4476 0 dvb-core 43448 3 [skystar2 mt312 tda1004x ves1820 stv0299 grundig_29504-491 grundig_29504-401 alps_tdlb7 alps_tdmb7 alps_bsrv2] videodev 6272 0 (autoclean) ------------------------------------------------- Some hints?;)
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
