you're missing the sp887x.o frontend driver.... Mark ----- Original Message ----- From: "Itai Tavor" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 09, 2004 1:19 PM Subject: [linux-dvb] Re: aver dvb-t
> > On 07/01/2004, at 9:00 PM, Hai Tran wrote: > > > I finally got the aver dvb-t card working two days ago, I am now > > trying to get the ttusb_dec working. > > > > When I had the aver dvb-t card working I was running > > > > Mandrake 9.2, kernel 2.4.23, with the patches from bytesex.org. I > > used the dvb-kernel/build-2.4 CVS build from 4 days ago. > > > > I initially had problems getting the card to work, two issues I found, > > that once resolved fixed up my problems. > > > > 1. bttv version > > 2. missing firmware in /etc/dvb/ > > > > Onced fixed, I could view the dvb-broadcast with Xine > > I've been trying to get my Aver DVB-T to work for weeks. I'm using > Fedora Core 1 with kernel 2.4.23-epia1, dvb-kernel updated just now > from CVS and video4linux-20040107. I get this on startup: > > bttv: driver version 0.9.12 loaded > bttv: snapshot date 2004-01-07 > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > bttv0: Bt878 (rev 17) at 00:14.0, irq: 10, latency: 32, mmio: 0xe2003000 > bttv0: subsystem: 1461:0761 (UNKNOWN) > please mail id, board name and the correct card= insmod option to > [EMAIL PROTECTED] > bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] > bttv0: gpio: en=00000000, out=00000000 in=009c00dd [init] > i2c-core.o: adapter bt878 #0 [hw] registered as adapter 0. > bttv0: using tuner=-1 > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > bttv0: registered device video3 > bttv0: registered device vbi0 > bt878: AUDIO driver version 0.0.0 loaded > bt878: Bt878 AUDIO function found (0). > bt878(0): Bt878 (rev 17) at 00:14.1, irq: 10, latency: 32, memory: > 0xe2004000 > DVB: registering new adapter (Ave). > i2c-core.o: driver i2c TV tuner driver registered. > i2c-core.o: driver saa7115 registered. > saa7114.c: starting probe for adapter bt878 #0 [hw] (0x10005) > > and tzap returns: > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > ERROR: failed opening '/dev/dvb/adapter0/frontend0' (No such device) > > I don't know why bttv still fails to recognize the card type. I tried > modprobe bttv card=105 (found that number is someone's forum post) but > got the same result. > > Any tips on what I should do now? > > TIA, Itai > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject. > > -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
