Hi, I want to use the Hauppauge remote connected to the Hauppage card. Is this possible at all?
The remote works with using the linuxtv DVB drivers (Version 1.1.0): cd av7110_loadkeys hauppauge.rc5 > /proc/av7110_ir evtest /dev/input/event0 How do I connect /dev/input/event0 to lirc? I found this message - it mentions a README file but none of the READMEs I found said anything about this. http://www.linuxtv.org/mailinglists/linux-dvb/2003/04-2003/msg00140.html Jan 30 14:15:27 mm lircd 0.7.0pre1: lircd(hauppauge_dvb) ready Jan 30 14:15:36 mm lircd 0.7.0pre1: accepted new client on /dev/lircd Jan 30 14:15:36 mm lircd 0.7.0pre1: could not open /dev/lirc Jan 30 14:15:36 mm lircd 0.7.0pre1: default_init(): No such device mm:/etc/init.d# lsmod Module Size Used by Not tainted ttusb_dec 14240 0 (unused) mt312 4488 0 dvb-ttusb-budget 21008 0 (unused) dvb-ttpci 280596 0 (unused) ttpci-eeprom 1280 0 [dvb-ttpci] saa7146_vv 32532 0 [dvb-ttpci] saa7146 9976 0 [dvb-ttpci saa7146_vv] cx24110 5160 0 grundig_29504-491 3156 0 grundig_29504-401 3784 0 tda1004x 7908 0 ves1820 4296 0 stv0299 7092 0 (unused) alps_tdmb7 3244 0 alps_tdlb7 4884 0 ves1x93 4244 0 dvb-core 34380 0 [ttusb_dec mt312 dvb-ttusb-budget dvb-ttpci cx24110 grundig_29504-491 grundig_29504-401 tda1004x ves1820 stv0299 alps_tdmb7 alps_tdlb7 ves1x93] video-buf 10608 0 [saa7146_vv] v4l2-common 2912 0 [saa7146_vv] v4l1-compat 12168 0 [saa7146_vv] videodev 5632 1 [saa7146_vv] lirc_dev 8200 0 (unused) evdev 3904 0 input 3264 0 [dvb-ttpci evdev] ds 6408 2 yenta_socket 9312 2 pcmcia_core 37248 0 [ds yenta_socket] 8139too 11112 1 (autoclean) mii 2368 0 (autoclean) [8139too] -- Wolfgang -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
