Hi all, I seem to have a problem tuning to one particular channel after I first boot my system. Here's what I mean. After a fresh boot, I got the following:
[EMAIL PROTECTED]:~$ tzap '7 Digital' using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 177500000 Hz status 00 | signal c9c9 | snr c4c4 | ber 0001fffe | unc ffffffff | status 0c | signal c9c9 | snr 6a6a | ber 00004e92 | unc 00000000 | status 01 | signal c9c9 | snr 0000 | ber 0001fffe | unc 00000000 | status 04 | signal c9c9 | snr 5454 | ber 00006154 | unc 00000000 | status 01 | signal c9c9 | snr 0000 | ber 0001fffe | unc 00000000 | status 0c | signal c9c9 | snr 5757 | ber 0001afac | unc 00000000 | status 05 | signal c9c9 | snr 0000 | ber 00013bf6 | unc 00000000 | [EMAIL PROTECTED]:~$ tzap '7 Digital' using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 177500000 Hz status 00 | signal c9c9 | snr baba | ber 0001fffe | unc 00000000 | status 0c | signal c9c9 | snr 6666 | ber 000086a4 | unc 00000000 | status 01 | signal c9c9 | snr 0000 | ber 0001fffe | unc 00000000 | status 0c | signal c9c9 | snr 5555 | ber 0000611c | unc 00000000 | [EMAIL PROTECTED]:~$ tzap 'Nine Digital' using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 191625000 Hz status 00 | signal caca | snr cbcb | ber 0001fffe | unc 00000000 | status 1f | signal caca | snr fefe | ber 00000182 | unc 00000000 | FE_HAS_LOCK [EMAIL PROTECTED]:~$ tzap '7 Digital' using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 177500000 Hz status 00 | signal c9c9 | snr d2d2 | ber 0001fffe | unc 00000000 | status 1f | signal c9c9 | snr fdfd | ber 0000045c | unc 00000000 | FE_HAS_LOCK As you can see, it wouldn't tune to 7 Digital first, but worked OK if I tune 'Nine Digital' first and then go back. Here's my .tzap/channels.conf entries for the two: 7 Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1328 Nine Digital:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:519:660:1072 There's another station that has FEC_2_3 and GUARD_INTERVAL_1_8 and I can tune that OK; the only difference left is that they're on UHF instead of VHF. Here's that entry: SBS DIGITAL 1:536625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:161:81:785 All our stations are QAM_64, 7 MHz, hierarchy none, inversion off. Any suggestions on what might cause this? Thanks Hamish -- Hamish Moffatt VK3SB <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
