i've bought a original tt card, a week ago. but it don't want to run: ----------
# uname -a Linux gockels1 2.6.1 #5 Wed Feb 4 14:49:15 CET 2004 i686 GNU/Linux # dmesg ... saa7146: register extension 'dvb'. saa7146: found saa7146 @ mem d08b3600 (revision 1, irq 11) (0x13c2,0x0000). DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3). Siemens/Technotrend/Hauppauge PCI rev1.3 adapter 0 has MAC addr = 00:d0:5c:03:29:97 probe_tuner: try to attach to Siemens/Technotrend/Hauppauge PCI rev1.3 /usr/src/dvb-kernel/build-2.6/stv0299.c: setup for tuner BSRU6, TDQB-S00x DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)... DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261a DVB: AV7111(0) - firmware supports CI link layer interface av7110(0): Crystal audio DAC detected videodev: "av7110" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ saa7146_vv: saa7146 (0): registered device video0 [v4l2] av7110: found av7110-0. ... # lspci00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01) 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) 00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 90) 00:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) 00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4200] (rev a3) #./scan ./scan dvb-s/Astra-19.2E > channels.conf scanning dvb-s/Astra-19.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12551500 V 22000000 5 >>> tune to: 12551:v:0:22000 WARNING: >>> tuning failed!!! >>> tune to: 12551:v:0:22000 (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. ---------- i used the linuxtv-dvb-1.0.1 CVS drivers and apps. made it with the ./makelinks script, because i'm running a 2.6.1. firmware is build in (yes, the right one). drivers that i load at start: dvb_ttpci -> for the card stv0299 -> for some dvb-s tuners the tuner driver is the only one, which gets "connection", but the scan fails. the same, when module is build in, with firmware, without, loaded seperatly... perhaps i made somthing wrong? i've read many (really many) faqs, and probed even more hours with kernel-builds, driver-builds, etc. but this prob seems to be new!? or should i just take a 2.4.XX kernel, for that should be more reliable?! i would be very, very grateful, cause that card wasnt cheap (alike nova dvb-s) regards, Alex -- GMX ProMail (250 MB Mailbox, 50 FreeSMS, Virenschutz, 2,99 EUR/Monat...) jetzt 3 Monate GRATIS + 3x DER SPIEGEL +++ http://www.gmx.net/derspiegel +++ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
