On Sunday 14 March 2004 13:11, Oliver Endriss wrote: > On Sunday 14 March 2004 10:27, Robert Schlabbach wrote: > > From: "Heino Goldenstein" <[EMAIL PROTECTED]> > > > > > Helmut Auer wrote: > > > > These settings are not working for me, but the long version > > > > from Oliver will: > > > > > > > > S19.2E 11700 V 9750 v [E0 10 38 F0] [E1 10 38 F0] [E1 10 38 F0] > > > > ... > > > > > > maybe your sat-cable does not transmit the DiSEqC-command reliable > > > and it needs some retransmits until your multiswitch it understand. > > > > Or maybe he just has a setup with _cascaded_ switches, which require > > repeating the DiSEqC sequence for any second or third level switches, > > which may not be connected to the bus the first or second time the > > command is sent. > > IIRC I added the retransmissions because switching was not 100% > reliable (with driver 0.9.4 and vdr 1.0.4, long time ago). > As I don't have a logic analyser, I was never able to track down the > real problem. Anyway, Eutelsat recommends to repeat the sequence, and > it increases reliability, so I never changed it... > > @Klaus: > Please change the "Optimized for full DiSEqC" sequence in diseqc.conf > of the vdr tar-ball, because some frontends do not turn on LNB power by > default.
it's a bug in a particular frontend driver then, it needs to get fixed there. If you specify a bus voltage of 13 or 18V you definitely don't mean VOLTAGE_OFF but expect the LNBP working, everything else is a bug. Holger -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
