On Saturday 20 March 2004 19:29, Helmut Auer wrote: > Andrew de Quincey wrote: > >>>Cool. The Root/Dpram in your 2003-11-08 DVB snapshot is the same as the > >>>ones I extracted from dvb-ttpci-01.fw.gz currently on the website. So > >>> its definitely not that; I just wanted to make ABSOLUTELY sure it > >>> wasn't some build issue. I'm assuming your 2003-11-08 snapshot works > >>> for your DISEQC BTW. > >> > >>Yes, it does. > > > >Another difference (though I don't see how it can affect DISEQC, but you > > never know!): > > > >In 1.0.0 and your 2003-11-08 snapsnot, hw_sections = 0 by default > > > >In 1.1.0 and CVS, hw_sections = 1 by default > > Hi Andrew, > I only tested for about 10 minutes now with switching hw_sections from 0 > to 1 and vice versa. > It looks like diseqc is much better with hw_sections=0 ! > Anyway once or twice it took a very long time to switch, what I never > have with version 1.0.0. > But as I said it looks good, maybe I have to check different diseqc > settings.
Wow COOL! > Now I have some questions: > Why does hw_sections=1 change ( or kill ) diseqc behaviour ? No idea, looking at the source, it only does anything when you're setting up TS section filters (DMX_TYPE_SEC). Someone with access to the firmware source will have to explain this. > What's the reason that the default for this parm has been changed ? Again, no idea; it says in a comment: " * crc32 is not implemented in the av7110 firmware, section filter checksum * checks work for hw_sections=0!" As its using the same firmware version, I doubt CRC32 magically works in the >=1.1.0 dvb-kernel drivers :) > and a totally different question: > Is there any possibilty to speed up the loading of dvb-ttpci module. > It takes about 5 to 10 seconds to load on my system. Can't help you with that :( -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
