Hello, I am trying to make an AirStar DVB-T PCI (REV: 1.0) card working. This card has the MT352 chip in the frontend.
Yesterday I got the CVS snapshot of dvb-kernel and built the build-2.4 directory. Then I tried to do: # insmod ./dvb-core.o # insmod ./mt352.o # insmod ./skystar2.o and after this, dmesg reports the follow: # dmesg PCI: Guessed IRQ 11 for device 00:0c.0 PCI: Sharing IRQ 11 with 00:0f.0 skystar2.c: FlexCopIIB(rev.195) chip found skystar2.c: the chip has 38 hardware filters DVB: registering new adapter (Technisat SkyStar2 driver). mt352_read_register: readreg error (ret == -121) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ As you can see in the last line there is an error. Looks like there is some problem with i2c. Am I missing something? Any suggestion? Thnx very much. Antonio Here some info about my system: ============================= # lspci 00:00.0 Host bridge: Cyrix Corporation PCI Master 00:0c.0 Network controller: Techsan Electronics Co Ltd B2C2 Sky2PC PCI [SkyStar2] (rev 02) 00:0d.0 Network controller: Globespan Semiconductor Inc.: Unknown device d002 (rev 01) 00:0f.0 Multimedia controller: Sigma Designs, Inc.: Unknown device 8471 (rev 03) 00:10.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 00:12.0 ISA bridge: National Semiconductor Corporation SCx200 Bridge 00:12.1 Bridge: National Semiconductor Corporation SCx200 SMI 00:12.2 IDE interface: National Semiconductor Corporation SCx200 IDE (rev 01) 00:12.3 Multimedia audio controller: National Semiconductor Corporation SCx200 Audio 00:12.4 VGA compatible controller: National Semiconductor Corporation SCx200 Video (rev 01) 00:12.5 Bridge: National Semiconductor Corporation SCx200 XBus 00:13.0 USB Controller: Compaq Computer Corporation ZFMicro Chipset USB (rev 08) # lsmod Module Size Used by Tainted: P skystar2 20200 0 (unused) mt352 3892 0 (unused) dvb-core 70324 0 [skystar2 mt352] udf 91168 0 (unused) supermount 78496 0 (unused) v4l_compat 8660 0 (unused) videodevX 19496 0 [v4l_compat] i2c-nscacb 10124 0 (unused) binfmt_aout 5084 0 bridge 22540 0 (unused) crc32 3648 0 (unused) loop 11036 0 (unused) rtc 7900 0 (unused) isofs 27924 0 (unused) zlib_deflate 20952 0 (unused) zlib_inflate 21380 0 [isofs] mousedev 5140 0 (unused) keybdev 2656 0 (unused) evdev 5408 0 (unused) i2o_proc 45756 0 (unused) i2o_config 8776 0 (unused) i2o_core 39984 0 [i2o_proc i2o_config] scx200_i2c 2372 0 (unused) scx200_gpio 2920 0 (unused) scx200 2532 0 [scx200_i2c scx200_gpio] i2c-algo-pcf 6076 0 (unused) i2c-proc 8848 0 (unused) i2c-dev 5572 0 (unused) i2c-algo-bit 8168 1 [scx200_i2c] i2c-core 18308 0 [i2c-nscacb i2c-algo-pcf i2c-proc i2c-dev i2c-algo-bit] stb 6036 0 realmagichwl_kernelland_snd 14568 0 (unused) realmagichwl_kernelland 959356 0 [realmagichwl_kernelland_snd] cx5530 19560 0 (unused) soundcore 6148 4 [realmagichwl_kernelland_snd cx5530] natsemi 18400 1 gp 287322 1 # ls -la /dev/dvb/adapter0/ drwxr-xr-x 1 root 0 0 Jan 1 1970 . drwxr-xr-x 1 root 0 0 Jan 1 1970 .. crw------- 1 root 0 250, 4 Jan 1 1970 demux0 crw------- 1 root 0 250, 5 Jan 1 1970 dvr0 crw------- 1 root 0 250, 7 Jan 1 1970 net0 -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
