From: "Johannes Stezenbach" <[EMAIL PROTECTED]> > Oliver Maier wrote: > > On Astra 19.2E 10832/H symbolrate 22000. A good example is pid 0x0fa1. > > For me the bit error rate is too high to get useful output. > On pid 0x0fa1 I get a few packets every one in a while, all > with the error indicator set -- no wonder the CC seems to be random.
I can receive this transponder without any FEC errors. When analyzing a captured 500MB file from that transponder, I only see one type of "error": ERROR - PID 0FA1 continuity counter 00, expected 01 I'm not sure, but this may actually be ok - it could simply be a "duplicate packet", which is allowed according to the MPEG-2 standard. I'm not sure, because the standard says: "two, and only two, consecutive packets of the same PID". Does that mean the packets must be consecutive in the transport stream (i.e. that there must be no other packets at all between them), or does it mean that there may be packets with other PIDs between them. Anyone know? BTW, I also found three continuity errors on PID 0x1391: Packet #846793: ERROR - PID 1391 continuity counter 05, expected 04 Packet #858025: ERROR - PID 1391 continuity counter 04, expected 06 Packet #1105722: ERROR - PID 1391 continuity counter 06, expected 05 Now those are definitely errors, but they are much more rare than the above "errors" (or maybe just duplicate packets) on PID 0x0FA1. Regards, -- Robert Schlabbach e-mail: [EMAIL PROTECTED] Berlin, Germany -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
