Hi, I have continued my tests and the CI on my Nova card is now working with the latest CVS version driver, the CAM is decoding the channel and I can show it with mplayer. There are some problems to solve, but its mainly working. Thank you Andrew for your good work.
The problems I detected so far: 1) When there is no CAM in the slot, no TS data is received. I think the DD1 port has to be switched, when no CAM is present. 2) Detection of CAM insertion does not work. It detects the CAM at driver load only. 3) There are possibilities to crash the kernel or put it in an endless loop, when the driver is unloaded, but not all applications, using it, are closed. 4) When I send a command to decode one video and two audio(Stereo and AC3) streams, no TS data is received anymore (neither free, nor crypted), till the CAM is reseted. This was the problem, why I wrote in my last message that the driver does not work correctly, but I think this has nothing to do with the Nova-CI driver, it could be a fault of my Cryptoworks-CAM. 5) I have also problems with loosing the TS data, like in 4), without decoding 2 audio streams, but I can not say exactly when it happens. Could also be a fault of my CAM or some parts of the Nova have to be reinitialized after changing decoding parameters. Regards, Bernhard -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
