Sorry, thought that this was a more general problem....
Here's some /var/log/messages output: # modprobe budget ---> log output: May 8 21:57:03 ambassadeur saa7146: register extension 'budget dvb' After your advice I tried this # modprobe budget-av ----> log output: May 8 21:57:03 ambassadeur saa7146: register extension 'budget dvb'.May 8 22:05:29 ambassadeur Linux video capture interface: v1.00 May 8 22:05:29 ambassadeur saa7146: register extension 'budget dvb /w video in'. May 8 22:05:29 ambassadeur saa7146: found saa7146 @ mem f8a83000 (revision 1, irq 5) (0x1131,0x4f56). May 8 22:05:29 ambassadeur DVB: registering new adapter (KNC1 DVB-S). May 8 22:05:29 ambassadeur probe_tuner: try to attach to KNC1 DVB-S May 8 22:05:30 ambassadeur drivers/media/dvb/frontends/stv0299.c: setup for tuner BSRU6, TDQB-S00x May 8 22:05:30 ambassadeur DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)... May 8 22:05:30 ambassadeur KNC1 DVB-S adapter 0 failed MAC signature check May 8 22:05:30 ambassadeur encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff May 8 22:05:30 ambassadeur budget_av: budget_av_attach(): cannot init saa7113. Then # modprobe budget-ci ----> log output May 8 22:10:22 ambassadeur saa7146: register extension 'budget_ci dvb'. I found entries in /dev/dvb/ after loading budget-av. Wow. Maybe I should start some testing now.. Thanks, Till >===== Original Message From Michael Hunold <[EMAIL PROTECTED]> ===== >Hello, >On 08.05.2004 21:10, tilsch wrote: >> I try to get a KNC1-card working with a 2.6.5-kernel. I have no problems >> to load the modules (budget, stv0299) but there are no entries in /dev/dvb/... > >> What is missing ? > >A proper report with some debug output from /var/log/messages perhaps? > >Seriously, we're no fortune tellers, so you need to give us more >informations. Did the driver find your card at all? > >Most likely you need to load budget-av or budget-ci, because these >handle your card. > >> Thanks, >> Till > >CU >Michael. > > >-- >Info: >To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
