For the very first start on a fresh bootet PC it works very well. But after I closed once the Program, I can't do a Channelscan or Tune to any Channel.
I'm using Kernel 2.6.6-rc3 with dvb-kernel cvs and udev. Because the lack of sysfs support I create the devices with the majedev script. My Card is Hauppauge 1.3 Here a small log from the Commandline: kaxtv: Starting KaxTV 0.23... kaxtv: Init fullscreen panel kaxtv: XInitThreads() kaxtv: Display aspect ratio (v/h): 1.00034 kaxtv: Using xine version 1-rc4 kaxtv: WARNING: No config file found, will create one... kaxtv: Post-init xine engine kaxtv: Use audio driver auto kaxtv: Use video driver auto kaxtv: Init video driver kaxtv: Init audio driver kaxtv: xine init successful kaxtv: Start event loop... kaxtv: Create System Tray kaxtv: New visualization plugin: none kaxtv: Create Postprocessing Filter: tvtime kaxtv: Parameter: method kaxtv: Parameter: enabled kaxtv: Parameter: pulldown kaxtv: Parameter: framerate_mode kaxtv: Parameter: judder_correction kaxtv: Parameter: use_progressive_frame_flag kaxtv: Parameter: chroma_filter kaxtv: Parameter: cheap_mode kaxtv: PostFilter: Get input 'video' kaxtv: PostFilter: Get output kaxtv: PostFilter: SetConfig tvtime:method=Greedy,enabled=1,pulldown=none,framerate_mode=half_top,judder_correction=0,use_progressive_frame_flag=1,chroma_filter=0,cheap_mode=1 kaxtv: PostFilter: tvtime Apply integer value 1 on offset 4 kaxtv: PostFilter: tvtime Apply integer value 0 on offset 16 kaxtv: PostFilter: tvtime Apply integer value 0 on offset 16 kaxtv: PostFilter: tvtime Apply integer value 1 on offset 20 kaxtv: PostFilter: tvtime Apply integer value 0 on offset 24 kaxtv: PostFilter: tvtime Apply integer value 1 on offset 28 kaxtv: PostFilter: tvtime Apply integer value 1 on offset 28 kaxtv: Deinterlace enabled: true kaxtv: PostFilter: Get output kaxtv: PostFilter: Get input 'video' kaxtv: Load Playlist If I want to tune in to a Channel: Asked to stop Live stopped Using DVB card "VES1893" tuning DVB-S to 11953000 h 27500000 inv:2 fecH:3 polling.... Getting frontend event polling.... polling.... polling.... polling.... polling.... polling.... and the Application hangs and I have to kill it. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
