Maybe you forgot the following:
echo 0 > /proc/sys/net/ipv4/conf/dvb0_0/rp_filter
echo 1 > /proc/sys/net/ipv4/conf/dvb0_0/forwarding
Il gio, 2004-04-29 alle 07:05, babar haq ha scritto:
> Hi
> I am desperately trying to get my sky star 2(B2C2) card to work on linux kernel
> 2.6.5 with open sky service. Apparently everything is working fine.
> First, I load the B2C2 module. Then we load the front end module which is detected
> to be stv0299 . Then we use dvbtune to lock the frequency and create the dvb0_0
> interface.The locking displays all the parameters to be fine e.g FE_LOCK.
> Lastly, Ifconfig is used to set a dummy ip and the mac address(given to opensky by
> us) of the dvb card.
> After that we connect to the dial up and login to open sky services using lynx
> http://sdr.eutelsat.com. All the information displayed is correct i.e the ip address
> of our dial up ,the mac address of dvb card and the pid.
> Then we set http_proxy variable to the opensky proxy to start recieving data from
> satellite. We do not get any data from the dish i.e 0 bytes.
> Can some one please guide us. Thanx in advance.
>
> Regards,
> Babar Haq
> --
> ___________________________________________________________
> Sign-up for Ads Free at Mail.com
> http://promo.mail.com/adsfreejump.htm
--
Vincenzo Di Massa <[EMAIL PROTECTED]>
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
