Hello again!
These are lasts lines from dmesg (after ./insmod.sh load): ------------------------------------------------------ Linux video capture interface: v1.00 skystar2.c: FlexCopII(rev.130) chip found skystar2.c: the chip has 6 hardware filters DVB: registering new adapter (Technisat SkyStar2 driver). probe_tuner: try to attach to Technisat SkyStar2 driver stv0299.c: setup for tuner Samsung TBMU24112IMB DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)... ------------------------------------------------------ Is that ok? Is there a missing line after the last one? This is very strange, because I can lock the transponder using BBTI SDK, the problem is that they not support MPEG, so I am trying linuxtv.org DVB Driver. Can any one help me? Thanks again! --- Niklas Peinecke <[EMAIL PROTECTED]> escreveu: > Ronaldo Richieri wrote: > > Hi Niklas > > > > For running "scan", I need to pass a config file > that is in a > > subdirectory, right? I put in this file (I took > Astra file as sample) > > the configuration of my satellite, but I am not > sure the units I should > > usr. For example, the Frequency is in Mhz? The > Symbol Rate, is KS/s? > > > > Thanks again! > > > Ah, I see your problem. AFAIK the freq should be in > kHz but the rest > should be OK. You must make shure, that the initial > transponder you > specify holds some digital information, otherwise it > doesn't work. > > Good luck, > > Niklas > > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] > with "unsubscribe linux-dvb" as subject. > ______________________________________________________________________ Yahoo! Messenger - Fale com seus amigos online. Instale agora! http://br.download.yahoo.com/messenger/ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
