Hi Kenneth,
> On Sunday 06 June 2004 14:09, Christian Gmeiner wrote: > > So i am now testing out the current cvs and get this: > > > > vdr root # szap -n 1 > > reading channels from file '/root/.szap/channels.conf' > > zapping to 1 'Das Erste': > > sat 0, frequency = 11837 MHz H, symbolrate 27500000, vpid = 0x0065, apid > > = 0x0066 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > FE_SET_VOLTAGE failed: Operation not permitted > > status 01 | signal ffff | snr ffff | ber 00000000 | unc 00000000 | > > ..... > > status 01 | signal ffff | snr ffff | ber 00000000 | unc 00000000 | > > > > Whats going wrong? > > > > I am using the stv0299 frontend with a KNC-1 aka Thypoon DVB-S. > > > > Will nobody help me? > > > > Come on.. > > I've been seeing this also, on a Hauppauge Nexus-S with a BSRU-6 (stv0299 > compatible) frontend. But on my setup, it's only triggered immediatly after > loading the driver, after a short while everything is just fine. I belive After short time I have the same probelms -> i can watch TV :( > it's caused by an I2C transfer timeout, but have not looked at it in any > great detail yet. I also have a Typhoon DVB-S card, but I have not had it > hooked up to the dish for a while now, trying to get in contact with the CI > interface on it, so I have it in my desktop for testing. I could try to move > it to my server and do some testing with the tuning later today (or > something). That would be nice. Christian
