Hi all, I have got a problem getting my new Technotrend USB Nova-T Box to work (Debian Kernel 2.6.5). After startup in my eyes all necessary drivers got loaded by hotplug.
Here is an output of lsmod: Module Size Used by dvb_ttusb_budget 26356 - dvb_core 57312 - After that I tried to get frontend modules loaded by using modprobe. I tried all the tda1004x, Grundig and Alps modules. All of them got loaded but I did not get any output in /var/log/messages, dmesg or syslog. The only interesting thing I found e.g. in dmesg is the following output right after startup: ------------------------------------------------------- usb 2-3: new full speed USB device using address 2 usb 2-3: new device strings: Mfr=1, Product=2, SerialNumber=0 drivers/usb/core/message.c: USB device number 2 default language ID 0x409 usb 2-3: Product: TT-DVB-T USB usb 2-3: Manufacturer: TechnoTrend AG drivers/usb/core/usb.c: usb_hotplug usb 2-3: registering 2-3:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug usb 2-3: registering 2-3:1.1 (config #1, interface 1) drivers/usb/core/usb.c: usb_hotplug Technotrend/Hauppauge USB-Nova 2-3:1.0: usb_probe_interface Technotrend/Hauppauge USB-Nova 2-3:1.0: usb_probe_interface - got id ttusb_probe: TTUSB DVB connected usb 2-3: usb_disable_device nuking non-ep0 URBs usb 2-3: unregistering interface 2-3:1.0 ------------------------------------------------------- For me it looks like the USB Box was recognized but then disabled. Does anybody has an idea? Thanks in advance! Frank.
