Am Freitag, 18. Juni 2004 00:19 schrieb Luca Olivetti: > Steffen Barszus wrote: > > Am Mittwoch, 16. Juni 2004 09:36 schrieb Steffen Barszus: > >>Am Dienstag, 15. Juni 2004 19:13 schrieb Luca Olivetti: > >>>Steffen Barszus wrote: > >>>>Hi ! > >>>> > >>>>I have installed yesterday the streamdev plugin > >>>> > >>>>No matter what i try i get only: > >>>> > >>>>..... > >>>>Playing http://192.168.1.1:3000/ps/1. > >>>>Resolving 192.168.1.1 for AF_INET6... > >>>>Couldn't resolve name for AF_INET6: 192.168.1.1 > >>>>Connecting to server 192.168.1.1[192.168.1.1]:3000 ... > >>>>Cache size set to 8192 KBytes > >>>>Connected to server: 192.168.1.1 > >>>>Cache fill: 0,00% (0 bytes) > >>> > >>>This happens to me when the channel is encrypted, otherwise it works > >>>fine (with mplayer & ps or xine &ts). > >>>Now, the streamdev server/client is not very stable (from time to time > >>>the server tells that it is rejecting too many connections and the only > >>>cure is to restart both the server and the client). > >>>vdr 1.3.10, mandrake 10. > >> > >>Well my problem is reproducable, after some hours the problem is there > >>again. It is not related to the firmware, because simply reloading > >>dvb-ttpci does not help, removing all dvb modules and depending did help, > >>it runs again :) Well i would say good enough if that are all problems, > >>will try to find out which module is responsible > > > > BTW its the skystar2 Module. > > Well, actually I see this too (I only have a skystar2+streamdev-server > and a streamdev-client+vdr-xine), but I don't think it was related to > the streamdev server (the "too many connections" problem is). > When it happens, the standalone scan program complains about "pid > timeout". Unloading and reloading the sksytar2 and the mt312 modules > cures the problem.
I have even tested rmmod skystar2 && modprobe skystar2 and even that is enough. I have further read that someone on vdrportal has written a small app that constantly accesses the second card from time to time and it cured for him the video datastream broken problem. And if streaming works a recording does not restart my vdr as usual. Normally if i press pause or record vdr restarts every time. So there is clearly a relation. Has really noone found out whats the problem here ? There were a lot of threads here and on vdrportal that described the problem, do the linux-dvb developers know about this ? If this would be fixed the useablity of my vdr box would clearly be improved. What i can't say is if the problem occurs too if the second card is a nova. Has someone did tests on this allready ? Or are there solutions, patches/driver versions which don't have that problem and i haven't seen them ? Regards Steffen
