Dirk Meyer wrote: > But now I have a new problem: I can't find any channels. I tested the > setup with windows, it is working. But when using dvbscan with a large > number of passible frequences, I still get no channels. > > Here is my dmesg output: > bttv: driver version 0.9.14 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > PCI: Found IRQ 11 for device 0000:00:0c.0 > PCI: Sharing IRQ 11 with 0000:00:0c.1 > bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 64, mmio: 0xdebfe000 > bttv0: detected: AVermedia DVB-T 771 [card=121], PCI subsystem ID is 1461:0771 > bttv0: using: AVerMedia AVerTV DVB-T 771 [card=121,autodetected] > bttv0: gpio: en=00000000, out=00000000 in=0090000f [init] > bttv0: using tuner=-1 > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: PLL: 28636363 => 35468950 . ok > bttv0: add subdevice "remote0" > bttv0: add subdevice "dvb0" > bt878: AUDIO driver version 0.0.0 loaded > bt878: Bt878 AUDIO function found (0). > PCI: Found IRQ 11 for device 0000:00:0c.1 > PCI: Sharing IRQ 11 with 0000:00:0c.0 > bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 11, latency: 64, memory: 0xdebff000 > attach: checking "bt878 #0 [hw]" > find by pci: checking "bt878 #0 [hw]" > attach: "bt878 #0 [hw]", to card 0 > DVB: registering new adapter (Ave). > DVB: registering frontend 0:0 (DVB-T Zarlink MT352 demodulator driver)... > > Using Linux 2.6.7 + dvb-cvs. > > > Looks good, except: using tuner=-1. Is this a problem? Does someone > has a working channels.conf for Bremen, Germany?
Small update: I now have a channels.conf and something for dvbscan which should work in Bremen. But it doesn't :-( Scanning always gives me 'tuning failed' for each frequence. Dirk -- Claiming that your operating system is the best in the world because more people use it is like saying McDonalds makes the best food in the world.
