Hiho, I try to get a Pinnacle PCTV Sat to work. I test with tvtime, but I always get this error message
videoinput: Can't get tuner info: Invalid argument
and only S-Video and Composite as input sources, but no DVB TV.
These are the details. If you need more information, please tell me.
* Debian unstable on an AMD XP 2500
* Kernel 2.6.6, self compiled from Debian sources with an unchanged
Debian kernel config file (needed to get the closed source ATI
X11 DRI drivers to work)
* I load the following kernel modules (found this in a so called "pinux"
PDF file from a Pinnacle community site)
modprobe bttv i2c_hw=1 card=94
modprobe cx24110
modprobe dvb-bt8xx
[ probably I'm already missing something essential here... ]
* lsmod output
Module Size Used by
dvb_bt8xx 8132 0
bt878 11632 1 dvb_bt8xx
cx24110 9176 1
dvb_core 87720 2 dvb_bt8xx,cx24110
bttv 152172 3 dvb_bt8xx,bt878
video_buf 21252 1 bttv
v4l2_common 6208 1 bttv
videodev 9920 1 bttv
i2c_algo_bit 9736 1 bttv
btcx_risc 4808 1 bttv
i2c_core 23492 3 dvb_bt8xx,bttv,i2c_algo_bit
firmware_class 10368 0
evdev 9536 0
fglrx 212804 7
visor 17804 0
usbserial 30640 1 visor
mousedev 10068 1
nfsd 197280 8
exportfs 6464 1 nfsd
lockd 64456 2 nfsd
sunrpc 143688 2 nfsd,lockd
snd_rme96 26788 3
snd_pcm_oss 53668 1
snd_mixer_oss 19904 2 snd_pcm_oss
snd_pcm 96996 2 snd_rme96,snd_pcm_oss
snd_page_alloc 11460 1 snd_pcm
snd_timer 25284 1 snd_pcm
snd 55140 7
snd_rme96,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
ipv6 252320 10
dm_mod 45152 0
via_agp 7616 1
agpgart 33960 2 via_agp
uhci_hcd 31376 0
usbcore 107292 5 visor,usbserial,uhci_hcd
soundcore 10400 4 bttv,snd
psmouse 20104 0
aic7xxx 204652 0
scsi_mod 121868 1 aic7xxx
via_rhine 21704 0
mii 5184 1 via_rhine
crc32 4352 2 dvb_core,via_rhine
af_packet 22408 0
rtc 12664 0
ext3 125672 3
jbd 61208 1 ext3
mbcache 9220 1 ext3
ide_disk 19776 6
ide_generic 1472 0
via82cxxx 14236 1
ide_core 148512 3 ide_disk,ide_generic,via82cxxx
unix 28528 432
* dmesg reports this when loading the modules
bttv: driver version 0.9.14 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0e.0, irq: 17, latency: 32, mmio: 0xbf000000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
bttv0: using: Pinnacle PCTV Sat [card=94,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=009f00fc [init]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878(0): Bt878 (rev 17) at 00:0e.1, irq: 17, latency: 32, memory: 0xbe800000
attach: checking "bt878 #0 [hw]"
find by pci: checking "bt878 #0 [hw]"
attach: "bt878 #0 [hw]", to card 0
DVB: registering new adapter (Pin).
DVB: registering frontend 0:0 (Conexant CX24110 with CX24108 tuner, aka
HM1221/HM1811)...
* looks good so far, but tvtime gives me this error message:
videoinput: Can't get tuner info: Invalid argument
* also scantv fails:
scanning channel list europe-west...
E2 ( 48.25 MHz): ioctl: VIDIOC_G_TUNER(index=0;name="";
type=unknown;capability=0x0 [];rangelow=0;rangehigh=0;
rxsubchans=0x0 [];audmode=MONO;signal=0;afc=0): Invalid argument
no station
... and so on
I searched the web, all mailing list archives I found, but without
success. From the CARDS list on linuxtv.org the Pinnacly PCTV card
should be supported, so I'm hopefully simply doing something wrong and
hopefully someone here can tell me what ;)
Thanks,
Joern
--
Joern Reder
Development Head ZYN! Coding Division - http://www.zyn.de/
pgpa2ONAo0TgQ.pgp
Description: PGP signature
