Hi, I have a problem, I don't get my Pinnacle PCTV Sat to work on Linux kernel 2.6. In my desperation I tried to load nearly every module I found in the dvb folder. After loading every module I tried whether the DVB-card works, but it did never. So the loaded dvb modules are right now:
ves1820 7172 0 stv0299 11784 0 sp887x 6916 0 nxt6000 8580 0 mt312 6916 0 grundig_29504_491 5764 0 grundig_29504_401 7428 0 at76c651 5640 0 alps_tdmb7 5892 0 alps_tdlb7 8336 0 dst 13452 0 dvb_bt8xx 8068 0 cx24110 7960 0 ves1x93 7696 0 dvb_ttpci 64652 0 dvb_core 77096 15 ves1820,stv0299,sp887x,nxt6000,mt312,grundig_29504_491,grundig_29504_401,at76c651,alps_tdmb7,alps_tdlb7,dst,dvb_bt8xx,cx24110,ves1x93,dvb_ttpci saa7146_vv 44672 1 dvb_ttpci saa7146 17828 2 dvb_ttpci,saa7146_vv v4l1_compat 13572 1 saa7146_vv firmware_class 9728 1 dvb_ttpci crc32 4608 2 dvb_ttpci,dvb_core ttpci_eeprom 2816 1 dvb_ttpci bt878 11184 2 dst,dvb_bt8xx snd_bt87x 12868 0 bttv 141036 2 dvb_bt8xx,bt878 video_buf 19588 2 saa7146_vv,bttv i2c_algo_bit 8968 1 bttv v4l2_common 6400 2 saa7146_vv,bttv btcx_risc 4744 1 bttv i2c_core 21764 3 dvb_bt8xx,bttv,i2c_algo_bit videodev 9728 2 saa7146_vv,bttv dmesg says: bttv: driver version 0.9.14 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 19, latency: 32, mmio: 0xdddfe000 bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c bttv0: using: Pinnacle PCTV Sat [card=94,autodetected] bttv0: gpio: en=00000000, out=00000000 in=009f00fc [init] bttv0: using tuner=-1 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bt878: AUDIO driver version 0.0.0 loaded dvb_bt8xx: unable to determine DMA core of card 0 attach: checking "bt878 #0 [sw]" find by pci: checking "bt878 #0 [sw]" But no file in /dev/dvb/* is always a device. For example I tried cat frontend0. I also tried dvbstream -c (0/1/2/3) but it always complains about DVR_DEVICE not being a device. Help, What am I doing wrong? Thanks in advance. Till
