Hi. I try to set up DVB-s. The Cinergy card employs the Philips SAA7146AH and SU1278/SHA. As far as I know these chips are supported. I run SuSE Linux 9.1. A rpm based on version 1.1.0 of the linux dvb driver is included. Here is what I did so far: I started dvb by typing "rcdvb start". The script returned "done". And "rcdvb status" returned "running".
/var/log/messages: oliver kernel: saa7146: register extension 'dvb' lsmod | grep dvb: dvb_bt8xx 7300 0 dvb_ttpci 72716 0 dvb_core 55316 16 ves1x93, ves1820, tda1004x, stv0299, sp887x, nxt6000, mt312, grundig_29504_491, grundig_29504_401, dst, cx24110, at76c651, alps_tdmb7, alps_tdlb7, dvb_bt8xx,dvb_ttpci bt878 11060 2 dst,dvb_bt8xx bttv 143500 2 dvb_bt8xx,bt878 saa7146_vv 45184 1 dvb_ttpci saa7146 18084 2 dvb_ttpci,saa7146_vv firmware_class 9472 1 dvb_ttpci ttpci_eeprom 2816 1 dvb_ttpci i2c_core 23940 4 dvb_bt8xx,bttv,i2c_algo_bit,ir_kbd_i2c szap -r -n 2: reading channels from file '/root/.szap/channels.conf' zapping to 2 'ZDF': sat 0, frequency = 11954 MHz H, symbolrate 27500000, vpid = 0x006e, apid = 0x0078 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' opening frontend failed: No such device Why does it not work? I think the frontend driver is stv0299. And the module is loaded. Thanks for your help, Fabian
