> On Thursday 08 July 2004 15:51, Christian Schuld wrote: > > I suppose > > none of the driver developers actually use such a setup with VDR regulary, > > because then it would have gotten more attention - simply because it is > > really annoying ;-) > > Yep it seems so :(. I posted this some weeks ago too and its an every day > question on vdr portal too, further it makes using streamdev-server quite > annoying, were it works nice otherwise .... Well i guess we did not complain > enough ... > > What information is needed to debug this ? > > Steffen
Hi, i have tried to debbuging this, but at the moment without success:( I have used 3 different cards as 2. or 3. card, and all of them fails in the same way. After some time (epg-scanning in vdr) get no more data from the cards. No more interrupts are handled in this case. Setting up the filters is ok, so i think something crashed on the cards and we get no more data in the (card) buffers, or the interrupt handler does not work anymore in this case. I have seen sync problems between the frontend threat and the demux thread also...for example vdr stops all section filter, tune und (re)start the section filter, but because the demux is much faster then the frontend threat this result in stopping filters, starting new filter and then tuning the card (call to fe_set_fontend in the frontend driver). Maybe some invalid data caused by the tuning during running filters "kills" something in the driver or at the card. Andreas
