On Sun, Jul 04, 2004 at 05:45:02PM +0200, Johannes Stezenbach wrote: > Antti-Pekka Liedes wrote: > > > > I have two Hauppauge DVB-C 2.1 cards with CI and Conax CAM on the first card. > > I'm using the first card's video out. I'm currently using linuxtv-dvb-1.1.1 > > and vdr 1.3.11, although the same problem occured with older drivers (the > > reference from VDR's homepage) and vdr 1.2.6. My kernel is a vanilla 2.4.25. > > > > The problem is, when I start recording a conditional access channel, I > > sometimes can't watch any free-to-air channels or even recordings. Just half > > an hour ago I began recording a CA channel, and switched to an FTA channel, > > but the picture is blank. I tried watching a vdr recording, but it displays a > > broken frame of the CA channel I'm recording and some garbage. > > Does this happen with other CAMs or is it specific to your Conax CAM? > Does it only happen with two DVB cards in your PC? >
I don't have other CAMs; Conax is the only encryption used in our cable network. I haven't tried with just one DVB card yet, I will test with just one card and with the Hauppauge + TechnoTrend budget card once I get the TT (hopefully next week). > The CA stack is a pretty isolated component, the av7110 demux > just sees a transport stream and doesn't care if it has been > processed by a CAM or not. > The broken picture and audio somehow suggest that the streams actually do get messed up somewhere. I'm trying to watch a recording from the disk, but I actually get broken picture and audio from the CA channel. > Johannes > > -- Antti-Pekka Liedes * [EMAIL PROTECTED] * I look around my room Aallonkohina 8 D 60 * [EMAIL PROTECTED] * is filled with candles 02320 ESPOO * * each one a story but FINLAND * +358 - 40 - 5873 593 * they end the same.
