Hello again... Ok, i changed the pci-slot for the avertv 711 and it works again...
Regards, Andreas -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Andreas Witte Sent: Thursday, July 15, 2004 6:07 AM To: [EMAIL PROTECTED] Subject: [linux-dvb] Re: Avermedia DVB-T Hello All ! I try to build that all again from scratch with a new fresh 2.6.7 kernel. I do that cause i thought about building a small manual for installing and trying to get the remote control to work. But what should i say? Im again stuck at a mt352-Problem. mt352_read_register : readreg error (ret == -121) mt352_read_register : readreg error (ret == -5) What ive done so far: Get a new fresh 2.6.7-Kernel. Then i patched it with the kraxel-2.6.7-1 patch. Get a fresh dvb-kernel cvs-grab and start the ./makelinks script in the maindir (of dvb-kernel). Then i build the kernel as usual (with the desired enabled optiones). I remember ive got this error while my first try, but i cant remember what ive done against it. Then: # modprobe bttv bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 10, latency: 32, mmio: 0xde002000 bttv0: detected: AVermedia DVB-T 771 [card=123], PCI subsystem ID is 1461:0771 bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00f2ff8f [init] bttv0: using tuner=4 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 . ok bttv0: add subdevice "dvb0" # modprobe dvb_bt8xx bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). bt878(0): Bt878 (rev 17) at 00:08.1, irq: 10, latency: 32, memory: 0xde003000 attach: checking "TT-Budget/WinTV-NOVA-T PCI" attach: checking "SMBus Via Pro adapter at 5000" attach: checking "ISA main adapter" attach: checking "bt878 #0 [hw]" find by pci: checking "bt878 #0 [hw]" attach: "bt878 #0 [hw]", to card 0 DVB: registering new adapter (Ave). mt352_read_register: readreg error (ret == -5) # modprobe mt352 mt352_read_register : readreg error (ret == -121) mt352_read_register : readreg error (ret == -5) Any ideas? Yes, i also have also a WinTV-Nova inside the PC. I cant understand what the cause is, that it wont work anymore, since i got that already. =(( Regards, Andreas
