Il mar, 2004-07-27 alle 23:42, Mike Ryan ha scritto: > The mailer cut half my mail off, as I put a single dot on a line, so here it is > again: > > Thanks to John and Jesper for the prompt reply. I tried that, and things looks > a > little different. > > I do this on one screen and leave it running: > tzap -a 0 -r "BBC ONE" > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > reading channels from file '/root/.tzap/channels.conf' > tuning to 505833330 Hz > video pid 0x0258, audio pid 0x0259 > status 0d | signal 3030 | snr dddd | ber 000064e9 | unc 0000000a | > status 1f | signal 3030 | snr ebeb | ber 0000003e | unc 00000000 | FE_HAS_LOCK > status 1f | signal 3030 | snr ebeb | ber 0000003f | unc 00000000 | FE_HAS_LOCK > status 1f | signal 3030 | snr eaea | ber 0000003c | unc 00000000 | FE_HAS_LOCK > status 1f | signal 3030 | snr e9e9 | ber 0000004a | unc 00000000 | FE_HAS_LOCK > status 1f | signal 3030 | snr eaea | ber 00000048 | unc 00000000 | FE_HAS_LOCK > etc, etc > >
you can run either tzap xor dvbstream at any one time :) so either 1) tzap -r on a terminal and mplayer - < /dev/dvb/adapter0/dvr0 2) or ./dvbstream -o -qam 16 -cr 3_4 600 601 | mplayer - 3) or even better setup a ~mplayer/channels.conf and run mplayer dvb://CHANNEL_NAME > and this on another one: > [EMAIL PROTECTED] dvbstream]# ./dvbstream -ps -qam 16 -cr 3_4 600 601 | mplayer - > dvbstream v0.6 - (C) Dave Chapman 2001-2004 > Released under the GPL. > Latest version available from http://www.linuxstb.org/ > dvbstream will stop after -1 seconds (71582788 minutes) > Setting filter for PID 600 > Setting filter for PID 601 > Using 224.0.1.2:5004:2 > version=2 > Streaming 2 streams > MPlayer 1.0pre4-3.3.3 (C) 2000-2004 MPlayer Team > [snip] Nico
