Hi! I've been struggling with my dvb-c card (budget, SAA-7146AH, VES-1820, Tuner TDBE2-032A) and linux-2.6.7 for a while now and still couldn't get it to tune correctly. Since my last two emails to this list (http://www.linuxtv.org/mailinglists/linux-dvb/2004/07-2004/msg00043.html and http://www.linuxtv.org/mailinglists/linux-dvb/2004/07-2004/msg00081.html) went mostly unanswered, I'll try it one more time: dmesg says: Linux video capture interface: v1.00 SAA5246A driver (SAA5246A interface) for VideoText version 1.6 SAA5249 driver (SAA5249 interface) for VideoText version 1.7 Colour QuickCam for Video4Linux v0.05 Zoran MJPEG board driver version 0.9.5 No known MJPEG cards found. Linux video codec intermediate layer: v0.2 stradis0: SDM2xx found videodev: "SAA7146A" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ stradis: 1 card(s) found. stradis0: config = 10 04 13 c2 26 0f ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130/34: v4l2 driver version 0.2.11 loaded cx2388x v4l2 driver version 0.0.3 loaded saa7146: register extension 'Multimedia eXtension Board'. saa7146: register extension 'hexium HV-PCI6/Orion'. saa7146: register extension 'hexium gemini'. saa7146: register extension 'dpc7146 demonstration board'. saa7146: register extension 'budget dvb'. saa7146: found saa7146 @ mem e0917000 (revision 1, irq 18) (0x13c2,0x1004). DVB: registering new adapter (TT-Budget/WinTV-NOVA-C PCI). DVB: VES1820(0): setup for tuner sp5659c DVB: VES1820(0): pwm=0x48 DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)... TT-Budget/WinTV-NOVA-C PCI adapter 0 has MAC addr = 00:d0:5c:02:15:c3 ./scan -5 dvb-c/de-wtnet scanning dvb-c/de-wtnet using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 450000000 6875000 0 3 >>> tune to: 450000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 WARNING: >>> tuning failed!!! >>> tune to: 450000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. ./scan -5 -i 0 dvb-c/de-wtnet gives the same result, just with INVERSION_OFF in the output. What could I try to get some more meaningful debug messages? Could you please give me some clues? thanks you! Benjamin Adler
-- NEU: WLAN-Router f�r 0,- EUR* - auch f�r DSL-Wechsler! GMX DSL = superg�nstig & kabellos http://www.gmx.net/de/go/dsl
