Eric DEZERT wrote:
Are you sure you loaded the dvb drivers coming from www.linuxtv.org With my debian 2.6.6, the release of scan available on cvs only works with the drivers also available in cvs, and not with the drivers from the 2.6.6 kernel.
I have 2.4 kernel and a week ( or 2 ) old CVS of the dvb drivers.
/Martin Saldert
-----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Martin Saldert Envoy� : mardi 3 ao�t 2004 12:06 � : dvb Objet : [linux-dvb] dvbscan not working?
I used the "scan" tool about a month ago to scan for my DVB channels. Everything worked fine.
Now its time for the olympics and i will get some extra channels for that. So i figured that i rescan to find them.
But i cant tune with dvbscan :-(
# ./dvbscan dvb-t/se-hbg > channels.conf
scanning dvb-t/se-hbg
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 482000000 0 2 0 3 1 2 0
>>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMI
SSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
So i figured i download the old scan software. Now i try to run "scan" but i get the same problem.
# ./scan dvb-t/se-hbg > channels.conf
scanning dvb-t/se-hbg
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 482000000 0 2 0 3 1 2 0
>>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMI
SSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
The channels should be there. I found them there before with "scan". And i can watch them in Mythtv.
Any ideas?
/Martin Saldert
