From: "Manu Abraham" <[EMAIL PROTECTED]> > Does the TT card use the STB6x00 or a TDA827x PLL only ?
The TT Budget S2-3200 card is made up of the following components: 1. ST LNBP21PD LNB Supply and Control (I2C address 0x10) 2. STB6100 RF tuner (I2C address not yet known to me) 3. STB0899 DVB-S2 demodulator (I2C address 0xD0) 4. Philips SAA7146A PCI multimedia bridge I presume the IR receiver and the CI work just the same as on the other TT Budget boards (IR through the upper 8 bits, CI through the lower 8 bits of the SAA7146A's 16-bit DEBI bus), so the existing budget-ci module should work for all that and only new/modified modules for the components 1 through 3 above are needed to fully support the board under Linux. FWIW, the PCI ID is of course 0x1131/0x7146 and the subvendor and subsystem is 0x13C2/0x1019. Best Regards, -- Robert Schlabbach e-mail: [EMAIL PROTECTED] Berlin, Germany _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
