On 9 Oct 2006, at 13:42, ThomP Pontoppidan wrote:
2006/10/9, Adam Bartlett <[EMAIL PROTECTED]>:
On Monday 09 October 2006 10:08 am, ThomP Pontoppidan wrote:
> 2006/10/8, Patrick Boettcher <[EMAIL PROTECTED]>:
> > On Thu, 5 Oct 2006, Adam Bartlett wrote:
> > > Hi All,
> > >
> > > I recently purchased a Nova-T-500 and the first tuner is
working
> > > perfectly with MythTV. However the second input only picks
up BBC1,
> > > BBC2, BBC3 (and all channels on that multiplex) etc and not
ITV1, ITV2,
> > > Channel4, and E4 etc. Both tuners are using the same
channels.conf
> > > file. It seems that the signal going to the second tuner is
not as
> > > strong as to the first tuner. In my area (using the Rowridge
> > > transmitter) as far as I know the ITV1, Channel4 multiplex
is more
> > > powerful than the BBC multiplex which makes this seem even
stranger!
> >
> > Can you check the force_lna_activation=1 module parameter?
>
> I also have problems with a certain mux on the second tuner and
would
> like to check the lna (I read about it in an earlier
discussion). How
> do I check/change this parameter?
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
You need to add the following line to /etc/modprobe.conf (I could
have got
this wrong but it seems to have worked wonders for me, thanks so much
Patrick!)
options dvb-usb-dib0700 force_lna_activation=1
Good luck!
Thanks! Now I've got perfect signal on all muxes:)
Is the nova-t 500 now fully usable?
Is the card a completely replacement for two older pci cards? Ie, is
it possible to get the full data from two transponders at the same
time, not only data from two channels?
--
Torgeir Veimo
[EMAIL PROTECTED]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
