On Thu, Nov 02, 2006 at 10:16:46AM +0100, Perceval Anichini wrote: > > [...] > > Tried that patch before. Forgot to say that. Made no difference. > Well, you need it anyway. Btw, afaik the card does not support > auto inversion. So you'll have to specify it (off is good for france) > > > When I add 166 Mhz I get the same result: > Well, i made a mistake, i meant 166kHz :/ > > Could you try 586166000, with inversion set to off ? > > It works for me, it shall works for you :) > > Perceval. >
Unfortunately it doesn't seem to do that: # scan -i0 se-o scanning se-o using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 586000000 0 2 0 3 1 2 0 initial transponder 538000000 0 2 0 3 1 2 0 initial transponder 506000000 0 2 0 3 1 2 0 initial transponder 698000000 0 2 0 3 1 2 0 initial transponder 746000000 0 2 0 3 1 2 0 >>> tune to: >>> 586000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 586000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 538000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 538000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 506000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 506000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 698000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: >>> 746000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 dumping lists (0 services) Done. # scan -i0 se-o-166Hz scanning se-o-166Hz using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 586166000 0 2 0 3 1 2 0 initial transponder 538166166 0 2 0 3 1 2 0 initial transponder 506166166 0 2 0 3 1 2 0 initial transponder 698166166 0 2 0 3 1 2 0 initial transponder 746166166 0 2 0 3 1 2 0 >>> tune to: >>> 586166000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 586166000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 538166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 538166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 506166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 506166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 698166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 698166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 746166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 746166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K :GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. # scan -i1 se-o scanning se-o using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 586000000 0 2 0 3 1 2 0 initial transponder 538000000 0 2 0 3 1 2 0 initial transponder 506000000 0 2 0 3 1 2 0 initial transponder 698000000 0 2 0 3 1 2 0 initial transponder 746000000 0 2 0 3 1 2 0 >>> tune to: >>> 586000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: >>> 538000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: >>> 506000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: >>> 698000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: >>> 746000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 dumping lists (0 services) Done. # scan -i1 se-o-166Hz scanning se-o-166Hz using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 586166000 0 2 0 3 1 2 0 initial transponder 538166166 0 2 0 3 1 2 0 initial transponder 506166166 0 2 0 3 1 2 0 initial transponder 698166166 0 2 0 3 1 2 0 initial transponder 746166166 0 2 0 3 1 2 0 >>> tune to: >>> 586166000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 586166000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 538166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 538166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 506166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 506166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 698166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 698166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 746166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 746166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. I'm beginning to suspect this card is defect or something. I'll see if I get a chance to try it in windows.. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
