Michel Verbraak schreef:
Manu Abraham schreef:
On 2/23/07, Michel Verbraak <[EMAIL PROTECTED]> wrote:
Just bought a new cpu and motherboard and made a clean install of
FC6 and
made a vanilla 2.6.20 kernel.
tried to merge the kromtek.com/dvb/mantis.tar.bz2 driver into the
2.6.20
kernel.
Sorry for the delayed mail, somehow it skipped my eye.
Did quite a bit of work and ported the mantis tree ..
http://kromtek.com/dvb/mantis-v4l-dvb.tar.bz2
that warning, what you saw is fine, it came in after the i2c changes
in .20. It is fixed in the tree that i have put at the URL above.
diseqc stuff shouldn't be a problem though.
Would be interesting to know how it goes at your side.
regards,
manu
Manu,
I will test this version tonight and report back.
My rotor is working fine I discovered a small bug in my own software.
When this was fixed I could rotate the dish without problems.
Regards,
Michel.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Manu,
The 24th of february 2007 version works allright for me. Following in
messagelog:
ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKB] -> GSI 19 (level,
low) -> IRQ 19
irq: 19, latency: 32
memory: 0xf68ff000, mmio: 0xffffc2000002e000
found a VP-1034 PCI DVB-S/DSS device on (02:05.0),
Mantis Rev 1 [1822:0014], irq: 19, latency: 32
memory: 0xf68ff000, mmio: 0xffffc2000002e000
MAC Address=[00:08:ca:19:9f:0b]
mantis_alloc_buffers (0): DMA=0xde50000 cpu=0xffff81000de50000 size=65536
mantis_alloc_buffers (0): RISC=0x30a04000 cpu=0xffff810030a04000 size=1000
DVB: registering new adapter (Mantis dvb adapter).
mantis_frontend_init (0): Probing for MB86A16 (DVB-S/DSS)
mantis_frontend_init (0): found MB86A16 DVB-S/DSS frontend @0x08
DVB: registering frontend 0 (Fujitsu MB86A16 DVB-S)...
Rotor is working allright so DiseqC is transfered normal.
I merged only the mantis part into my kernel sources. This is a x86_64
kernel.
What should be the differences to the previous version?
I did not yet try a scan for the missing channels to see if they are
visible right now because my dish needs reallignement, reception is
poort, after a storm a few weeks ago and currently it is pooring rain
here so I was not able to get on my roof.
Regards,
Michel.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
