Hello All, I am interested in support for the Compro VideoMate T100 DVB-T PCI card. The T200, T200A and T300 are already supported, so I hoping that T100 support is already in the works. If it is not, I would like to offer my services to get this device supported. By way of introduction, I am a Software Engineer of some 10 years experience. I have worked on Linux device drivers in the past, but that was some 9 years ago! I feel I have the skills to contribute something useful to this group; I may just need some guidance to get started. Spare time is scarce at the moment, so my contributions may also be slow coming.
The chips of interest on the card that I can see are saa7130HL, qt1010 and MT352. All of which seem well supported in the latest kernel, so this should be straight forward enough... The card is auto-detected as the Compro VideoMate T200 by the saa7134 driver in the 2.6.21-rc7 kernel, so I expect that it uses the same vendor/device IDs in the same way that the T200A does. Although not tested, the analog video capture port and even the IR remote control port are found by the current unmodified driver. Any advice or guidance appreciated! Cheers, Dan _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
