Mike,
If I remember quite well your card has a cx24106 tuner / frontend.
That means:
1. Even if bttv recognizes it, it will be unsupported, as a new frontend
driver would be necessary to be written, and Conexant is not very helpful
in those cases.
A. Its a cx24110 there already is a driver.
2. Even if it is recognized by bttv, neither the "pure" Mercurial tree would
help, nor the Mercurial tree with the implemented cx878 tree.
A how do you know?
3. As I told you already, the cx878 driver runs, but it is not finished yet.
So it does not help at all to fiddle around with it. You won't neither get a
picture nor sound even if you were running a supported card.
A how do you know?
4. I already asked you to send in a dmesg, but you simply ignored that
request. Why please?
Cheers
Uwe
Dmesg and lspci follow.
dmesg
journald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Adding 262136k swap on /mnt/hda2/swapfile. Priority:-1 extents:119
across:428048k
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:00:09.0
PCI: Sharing IRQ 5 with 0000:00:09.1
bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 5, latency: 64, mmio: 0xcddfe000
bttv0: detected: Avermedia M109 [card=199], PCI subsystem ID is 1461:0199
bttv0: using: Avermedia M109 [card=199,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=004f00df [init]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
PCI: Found IRQ 5 for device 0000:00:09.1
PCI: Sharing IRQ 5 with 0000:00:09.0
bt878_probe: card id=[0x1991461],[ Avermedia M109 ] has DVB functions.
bt878(0): Bt878 (rev 17) at 00:09.1, irq: 5, latency: 64, memory: 0xcddff000
DVB: registering new adapter (bttv0).
DVB: registering frontend 0 (Conexant CX24110 DVB-S)...
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[EMAIL PROTECTED]:/home/mike/build-v4l/v4l-dvb#
lspci -v
00:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture
(rev 11)
Subsystem: Avermedia Technologies Inc Unknown device 0199
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cddfe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
11)
Subsystem: Avermedia Technologies Inc Unknown device 0199
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cddff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Uwe all i really want is some help with Mercurial to merge the driver , or
whatever , as it exists. I'm doing it purely for interests sake and as far
as I am aware I am still able to decide what to do with my own time.
I have no intention of interfering, demanding support or anything else.
Rgds
Mike
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
