Am Freitag, 1. Juni 2007 20:13 schrieben Sie:
> Uwe Bugla wrote:
> > In current kernel 2.6.22-rc3 the frontend module dvb-pll.c is attached as
> > a generic standard for all bt8xx-based DVB cards. This is no good
> > solution.
> >
> > Fact is:
> > The only bt8xx-based card taking advantage of that pll library is the
> > DViCO FusionHDTV Lite 5. All other bt8xx-based DVB cards do not take any
> > advantage of this pll library.
> >
> > The following patch corrects this problem without breaking any card
> > support. For further SOBs I do appreciate the relevant persons Cced.
> >
> > Signed-off-by: Uwe Bugla <[EMAIL PROTECTED]>
>
> NACK.
>
> This hack is unacceptable. Uwe, Please have patience
In fact I had enough patience, for a couple of months now.
Even if you do not like it, it is a functionable compromise solution for now.
There is no technical reason to nack it at all. If there is one, then it's
either a personal issue or a matter of design.
The fact that you reacted so quickly prefares option 1 (i. e. personal issue).
And the tactical background of telling some other person to wait (or to be
patient) without offering an adequate time window for the WHEN is a gesture
of humiliation (I know that gesture already very well from Manu, and I do not
like it at all).
Above that you were not the only one I was asking for a SOB. I only wanted to
try fair play (i. e. not overstepping anybody).
Regards
Uwe
P. S.: To let somebody starve at the long arm: Ever heard what that means,
Mike? In fact I am not keen on flames, but I know people who provoke them by
their inacceptable gestures. And that's it what must become past in here.
The other people reading this I would appreciate to test the two patches and
complain if I have done anything wrong. My door stays open for real technical
criticism.
Thanks for reading :)
> -- I have a few ideas
> on how to do this without using #ifdef's , but I am spending my time on
> other things right now. Trent also had some ideas on how remove the static
> dependencies on dvb-pll, but we all have bigger fish to fry.
>
> For the time being, you should use this on your own kernel configuration,
> but this is not correct, and should not be pushed into mainline.
>
> Regards,
>
> Mike Krufky
>
> > --- a/drivers/media/dvb/bt8xx/Kconfig
> > +++ b/drivers/media/dvb/bt8xx/Kconfig
> > @@ -7,7 +7,6 @@ config DVB_BT8XX
> > select DVB_CX24110 if !DVB_FE_CUSTOMISE
> > select DVB_OR51211 if !DVB_FE_CUSTOMISE
> > select DVB_LGDT330X if !DVB_FE_CUSTOMISE
> > - select DVB_PLL
> > select DVB_ZL10353 if !DVB_FE_CUSTOMISE
> > select DVB_DST if !DVB_FE_CUSTOMISE
> > select FW_LOADER
> > --- a/drivers/media/dvb/frontends/Kconfig
> > +++ b/drivers/media/dvb/frontends/Kconfig
> > @@ -279,6 +279,7 @@ config DVB_LGDT330X
> > tristate "LG Electronics LGDT3302/LGDT3303 based"
> > depends on DVB_CORE && I2C
> > default m if DVB_FE_CUSTOMISE
> > + select DVB_PLL
> > help
> > An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
> > to support this frontend.
> > @@ -291,8 +292,9 @@
> > depends on DVB_CORE && I2C
> > default m if DVB_FE_CUSTOMISE
> > help
> > - This module driver a number of tuners based on PLL chips with a
> > - common I2C interface. Say Y when you want to support these tuners.
> > + This module driver is needed by a number of tuners based on PLL chips
> > + with a common I2C inferface.
> > + Exceptions are: All bt8xx-based DVB cards except DViCO FusionHDTV 5
> > Lite.
> >
> > config DVB_TDA826X
> > tristate "Philips TDA826X silicon tuner"
> > --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
> > +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
> > @@ -568,24 +568,6 @@ static struct lgdt330x_config
> > .demod_init = digitv_alps_tded4_demod_init,
> > };
> >
> > -static struct lgdt330x_config tdvs_tua6034_config = {
> > - .demod_address = 0x0e,
> > - .demod_chip = LGDT3303,
> > - .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
> > -};
> > -
> > -static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
> > -{
> > - /* Set pin 27 of the lgdt3303 chip high to reset the frontend */
> > -
> > - /* Pulse the reset line */
> > - bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
> > - bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */
> > - msleep(100);
> > -
> > - bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
> > - msleep(100);
> > -}
> >
> > static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
> > {
> > @@ -606,15 +588,39 @@ case BTTV_BOARD_DVICO
> > }
> > break;
> >
> > +#if defined(CONFIG_DVB_LGDT330x)
> > +static struct lgdt330x_config tdvs_tua6034_config = {
> > + .demod_address = 0x0e,
> > + .demod_chip = LGDT3303,
> > + .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
> > +};
> > +
> > +static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
> > +{
> > + /* Set pin 27 of the lgdt3303 chip high to reset the frontend */
> > +
> > + /* Pulse the reset line */
> > + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
> > + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */
> > + msleep(100);
> > +
> > + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
> > + msleep(100);
> > +}
> > +
> > case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
> > lgdt330x_reset(card);
> > card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config,
> > card->i2c_adapter); if (card->fe != NULL) {
> > dvb_attach(dvb_pll_attach, card->fe, 0x61,
> > card->i2c_adapter, &dvb_pll_lg_tdvs_h06xf);
> > dprintk ("dvb_bt8xx: lgdt330x detected\n");
> > }
> > break;
> > +#else
> > + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
> > + return NULL;
> > +#endif // CONFIG_DVB_LGDT330x //
> >
> > case BTTV_BOARD_NEBULA_DIGITV:
> > /*
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > --- a/drivers/media/dvb/bt8xx/Kconfig
> > +++ b/drivers/media/dvb/bt8xx/Kconfig
> > @@ -7,7 +7,6 @@ config DVB_BT8XX
> > select DVB_CX24110 if !DVB_FE_CUSTOMISE
> > select DVB_OR51211 if !DVB_FE_CUSTOMISE
> > select DVB_LGDT330X if !DVB_FE_CUSTOMISE
> > - select DVB_PLL
> > select DVB_ZL10353 if !DVB_FE_CUSTOMISE
> > select DVB_DST if !DVB_FE_CUSTOMISE
> > select FW_LOADER
> > --- a/drivers/media/dvb/frontends/Kconfig
> > +++ b/drivers/media/dvb/frontends/Kconfig
> > @@ -279,6 +279,7 @@ config DVB_LGDT330X
> > tristate "LG Electronics LGDT3302/LGDT3303 based"
> > depends on DVB_CORE && I2C
> > default m if DVB_FE_CUSTOMISE
> > + select DVB_PLL
> > help
> > An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
> > to support this frontend.
> > @@ -291,8 +292,9 @@
> > depends on DVB_CORE && I2C
> > default m if DVB_FE_CUSTOMISE
> > help
> > - This module driver a number of tuners based on PLL chips with a
> > - common I2C interface. Say Y when you want to support these tuners.
> > + This module driver is needed by a number of tuners based on PLL chips
> > + with a common I2C inferface.
> > + Exceptions are: All bt8xx-based DVB cards except DViCO FusionHDTV 5
> > Lite.
> >
> > config DVB_TDA826X
> > tristate "Philips TDA826X silicon tuner"
> > --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
> > +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
> > @@ -568,24 +568,6 @@ static struct lgdt330x_config
> > .demod_init = digitv_alps_tded4_demod_init,
> > };
> >
> > -static struct lgdt330x_config tdvs_tua6034_config = {
> > - .demod_address = 0x0e,
> > - .demod_chip = LGDT3303,
> > - .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
> > -};
> > -
> > -static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
> > -{
> > - /* Set pin 27 of the lgdt3303 chip high to reset the frontend */
> > -
> > - /* Pulse the reset line */
> > - bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
> > - bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */
> > - msleep(100);
> > -
> > - bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
> > - msleep(100);
> > -}
> >
> > static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
> > {
> > @@ -606,15 +588,39 @@ case BTTV_BOARD_DVICO
> > }
> > break;
> >
> > +#if defined(CONFIG_DVB_LGDT330x)
> > +static struct lgdt330x_config tdvs_tua6034_config = {
> > + .demod_address = 0x0e,
> > + .demod_chip = LGDT3303,
> > + .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
> > +};
> > +
> > +static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
> > +{
> > + /* Set pin 27 of the lgdt3303 chip high to reset the frontend */
> > +
> > + /* Pulse the reset line */
> > + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
> > + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */
> > + msleep(100);
> > +
> > + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
> > + msleep(100);
> > +}
> > +
> > case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
> > lgdt330x_reset(card);
> > card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config,
> > card->i2c_adapter); if (card->fe != NULL) {
> > dvb_attach(dvb_pll_attach, card->fe, 0x61,
> > card->i2c_adapter, &dvb_pll_lg_tdvs_h06xf);
> > dprintk ("dvb_bt8xx: lgdt330x detected\n");
> > }
> > break;
> > +#else
> > + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
> > + return NULL;
> > +#endif // CONFIG_DVB_LGDT330x //
> >
> > case BTTV_BOARD_NEBULA_DIGITV:
> > /*
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > linux-dvb mailing list
> > [email protected]
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
