> It should be possible.
> Tuner and channel decoder are supported (though there is a problem with
> the DISEQc i need to cross check).
> But i will need additional information:
> What is the type of the LNB controller?
> This an additional chip on the board, possibly in a small package sitting
> close
> to an inductor.
> (might be ISl64xx)
To give you all information I can get from the PCB:
adhesive on the metal cage left:
2005/36 SV20
3112 297 13801 SD1878/SHA
small controller chip mid/top:
Philips logo
TDA10086HT
SA7423.1 35
ZSG05322
big controller chip mid/bottom:
Philips logo
SAA7134HL
CE3155 13
TSG05151
very small LNB controller chip right:
ISL
6405ER
H527BB
Printed on the PCB:
CTX929_V2 05242005
Adhesive on the backside:
MEDION
Type: SAT-TUNER 7134
Rev: CTX929_V.1 DVB-S
P/N: 20029268
There's no typo: The revision number given on the board is CTX929_V2,
the one given on the adhesive is CTX929_V.1.
Hope this helps and thanks for your help!
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
