Hartmut,
>Summing up the test results, i have the impression that this card is
different
>from what we have yet.
>I am almost sure that the problem lies in the GPIO configuration. Please try
>the
>following:
>Please keep forcing the card type to 94
>In the configuration structure (saa7134-dvb.c):
>static struct tda1004x_config ads_tech_duo_config = {
>change the entry
>.gpio_config = TDA10046_GP00_I,
>to
>.gpio_config = TDA10046_GP10,
>I expect that this makes DVB-T work but it might break analog TV.
>Please try also
>.gpio_config = TDA10046_GP10_I,
>This should make analog work again but it might carsh the channel decoder
>(bad firmware) if this is the case, please report this. It might be necessary
>to
>increase a delay in the channel decoder initialization procedure.
applied your patches and - guess what - it worked. Even sound worked
spontaneously. This is brilliant, thanks a lot. Analog didn't work apart from
channel E12 (FAB - Fernsehen aus Berlin). In DVB-T, I haven't been able to
tune in into all stations (e.g. RTL, ZDF), but this might be an antenna
issue.
I will also apply Hermann's patch for the autodetection thing, then there's
another card in the database.
Do you need any further card-related informations? Photos, whatsoever?
Thanks again for this great support.
Best regards
Werner
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
