Hi, I'm trying to setup the above card to work in DVB-S mode without success.
I'm using Suse 10.1, with kernel 2.6.16.21-0.8-smp (distro release) and the latest hg downloaded drivers from linuxtv.org, also I tried steven's branch. I cannot make work the dvb-s frontend, only CX22702 (dvb-t) is loaded. Many times I have to play with cx8800/cx8802 load to register the dvb-t frontend getting errors like... >>>>>>>>>> Jul 11 12:56:54 pinocho kernel: cx8802_register_driver() ->registering driver type=dvb access=shared Jul 11 12:56:54 pinocho kernel: CORE cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53] Jul 11 12:56:54 pinocho kernel: cx88[0]/2: cx2388x based dvb card Jul 11 12:56:54 pinocho kernel: cx22702_readreg: readreg error (ret == -121) Jul 11 12:56:54 pinocho modprobe: FATAL: Error inserting cx88_dvb (/lib/modules/2.6.16.21-0.8-smp/kernel/drivers/media/video/cx88/cx88-dvb.ko): No such device Jul 11 12:56:54 pinocho kernel: cx88[0]: frontend initialization failed Jul 11 12:56:54 pinocho kernel: cx8802_dvb_probe dvb_register failed err = -1 Jul 11 12:56:54 pinocho kernel: cx8802_register_driver() ->probe failed err = -1 >>>>>>>>>>>>>>>>< this is the output of lsmod |grep cx >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cx88_dvb 13700 0 cx8800 32368 0 compat_ioctl32 5120 1 cx8800 cx88_vp3054_i2c 6528 1 cx88_dvb mt352 9348 1 cx88_dvb dvb_pll 13444 1 cx88_dvb or51132 11396 1 cx88_dvb video_buf_dvb 9348 1 cx88_dvb nxt200x 15364 1 cx88_dvb isl6421 5888 1 cx88_dvb zl10353 9096 1 cx88_dvb cx24123 14472 1 cx88_dvb lgdt330x 11268 1 cx88_dvb cx22702 9092 1 cx88_dvb cx8802 18820 1 cx88_dvb cx88xx 63396 3 cx88_dvb,cx8800,cx8802 ir_common 37380 1 cx88xx i2c_algo_bit 12168 2 cx88_vp3054_i2c,cx88xx tveeprom 17552 1 cx88xx videodev 27392 2 cx8800,cx88xx v4l2_common 19968 3 cx8800,cx88xx,videodev btcx_risc 8072 3 cx8800,cx8802,cx88xx video_buf 24708 5 cx88_dvb,cx8800,video_buf_dvb,cx8802,cx88xx i2c_core 23680 14 cx88_vp3054_i2c,mt352,dvb_pll,or51132,nxt200x,isl6421,zl10353,cx24123,lgdt330x,cx22702,cx88xx,i2c_algo_bit,tveeprom,i2c_i801 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<< and the kernel messages from dmesg.... Jul 11 12:58:29 pinocho kernel: compat_ioctl32: module not supported by Novell, setting U taint flag. Jul 11 12:58:29 pinocho kernel: cx8800: module not supported by Novell, setting U taint flag. Jul 11 12:58:29 pinocho kernel: cx2388x v4l2 driver version 0.0.6 loaded Jul 11 12:58:29 pinocho kernel: ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 20 (level, low) -> IRQ 50 Jul 11 12:58:29 pinocho kernel: cx88[0]/0: found at 0000:05:04.0, rev: 5, irq: 50, latency: 32, mmio: 0xd0000000 Jul 11 12:58:29 pinocho kernel: cx88[0]/0: registered device video0 [v4l2] Jul 11 12:58:29 pinocho kernel: cx88[0]/0: registered device vbi0 Jul 11 12:58:29 pinocho kernel: cx88[0]/0: registered device radio0 Jul 11 12:58:56 pinocho kernel: cx88_dvb: module not supported by Novell, setting U taint flag. Jul 11 12:58:56 pinocho kernel: cx2388x dvb driver version 0.0.6 loaded Jul 11 12:58:56 pinocho kernel: cx8802_register_driver() ->registering driver type=dvb access=shared Jul 11 12:58:56 pinocho kernel: CORE cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53] Jul 11 12:58:56 pinocho kernel: cx88[0]/2: cx2388x based dvb card Jul 11 12:58:56 pinocho kernel: DVB: registering new adapter (cx88[0]) Jul 11 12:58:56 pinocho kernel: DVB: registering frontend 0 (Conexant CX22702 DVB-T)... >>>>>>>>>>>>>>>>>>>> Could someone post his modprobe.d file with the working load/parameters order to get the dvb-s frontend loaded? Thanking in advance, -- Emilio Castellano -- Emilio Castellano Leiva Departamento de Sistemas Abdón Terradas, 4 - 28015 Madrid (ESPAÑA) T.: +34 91 121 4430 | www.microgenesis.es _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
