Hi List,
What is needed to add support for the Compro VideoMate S300/S350 DVB-S
budget card?
Below is the output of 'lspci -v -nn':
07:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7130
Video Broadcast Decoder [1131:7130] (rev 01)
Subsystem: Compro Technology, Inc. Unknown device [185b:c900]
Flags: bus master, medium devsel, latency 32, IRQ 66
Memory at 51104800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
The card is uses the Philips SAA7130 PCI bridge with a ZL10313
demodulator/frontend chip, which the DVB wiki says is closely related to
the mt312 demodulator.
It is not clear to me how to specify the mt312 tuner, and 'modprobe
saa7134-dvb' fails with 'saa7130[0]: frontend initialization failed'
when loading the wrong (mt532) frontend dependency.
The eeprom output is reported as follows:
saa7130[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff
saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 40: ff d6 00 c0 86 1c 02 01 02 ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Any help would be much appreciated
Regards
JD
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
